Select your vehicle
-13%

Rubicon Express Control Arm Drop Brackets – RE9800

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Control arm geometry correction brackets for lifted Wrangler JK front short arm suspensions
  • Reduce front control arm angles and increase anti-dive, per the manufacturer
  • Bolt-on with no cutting, drilling or welding
  • Black powder coat, front mounting location

Description

Overview

The Rubicon Express RE9800 is a set of control arm geometry correction brackets for front short arm suspensions on lifted Jeep Wrangler JK models. They are built for daily driven Jeeps and reduce the front control arm angles when installed on a lifted JK. The change improves ride quality and increases anti-dive, which is the feeling of the front compressing during hard braking.

The brackets fit the 2007-2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims. Confirm fit for your vehicle’s year, model and trim before ordering.

How the brackets work

A lifted short arm suspension leaves the front control arms at a steep angle. The brackets move the mounting positions so the arm angle is reduced. With the angle reduced, the control arm no longer works against the coil spring and shock through the suspension cycle, which gives a smoother ride with less jarring on rough roads, rocks and ledges.

The new mounting positions also change anti-dive. A higher anti-dive figure means the vehicle responds more predictably in hard braking and on irregular roads. They work with a Rubicon Express short arm suspension and with other short arm systems, and they work with either stock or aftermarket control arms.

Key features

  • Control arm geometry correction brackets
  • Front mounting location
  • Black powder coat finish
  • Bolt-on installation with no cutting, drilling or welding
  • Works with stock or aftermarket control arms, per the manufacturer
  • Compatible with Rubicon Express short arm suspensions and other short arm systems, per the manufacturer
  • Covered by the Rubicon Advantage Warranty, per the manufacturer

Setting up a lifted front end

Lifting a Wrangler changes the geometry of the front suspension, and the control arms are often the first thing to show it. When the arm angle gets steep, the ride can feel harsh and the braking response can change. Correcting the arm angle brings the front suspension closer to its intended geometry, but the lift height and the arm design both affect how much correction is needed.

Once geometry parts are installed, the rest of the front end usually needs attention. Alignment should be checked, since caster and toe move with the arm position. Brake lines and front driveline angles should be inspected for stretch or binding, and steering components should be checked for clearance at full turn. Re-check all fasteners after the first few drives.

  • Check front alignment after the lift is set
  • Inspect brake lines for stretch or rubbing
  • Recheck driveline angles at full suspension travel
  • Re-check fasteners after the first drives

Specifications

Brand Rubicon Express
Part number RE9800
UPC 614901096309
Mounting location Front
Finish Black powder coat
Installation Bolt-on, no cutting, drilling or welding
Fitment type Direct fit

Vehicle fitment

Rubicon Express lists these brackets for the 2007-2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, and for the Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S and Unlimited X trims.

Fits the 2007-2018 Wrangler JK in the trims above. Confirm the year, model and trim of your vehicle before ordering.

Installation notes

The brackets are a bolt-on fit, so no cutting, drilling or welding is needed. After installing them on a lifted vehicle, have the front alignment checked, since the control arm angles change. Check the brake lines and the front driveline angles after the lift is set.

What’s included

One set of front control arm geometry correction brackets, with the mounting location set to front. Check the package contents against your installation before starting, including the bolts.

SKU: R/ERE9800 Category:

Specification

Shipping weight 16.00 lbs
Package dimensions 10.00 × 6.00 × 6.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Do the RE9800 brackets fit a 2015 Jeep Wrangler JK?

Yes. It fits the 2007-2018 Jeep Wrangler JK, which includes 2015 models in the listed trims. Confirm the year, model and trim on your vehicle before ordering.

Do the brackets need welding or drilling?

No. They are a bolt-on fit with no cutting, drilling or welding required. The install is a simple bolt-up, though the front alignment should be checked after the lift is set.

Do the RE9800 brackets work with aftermarket control arms?

Yes. They work with either stock or aftermarket control arms, and with short arm suspensions from other manufacturers as well as the Rubicon Express short arm. Confirm fit for your suspension setup before ordering.

How do I know if the front alignment needs attention after a lift?

Check alignment if the vehicle pulls, tire wear is uneven, or the steering wheel sits off center after the install. Alignment should be set once the lift and geometry parts are in place, since the control arm angles change the settings.

Do these brackets work alongside a suspension lift?

Yes, they are made for use on a lifted front end with short arms. They change arm angles, so they are best installed as part of the lift setup with an alignment check afterward rather than added later.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon