Overview
The RE9900 is a set of control arm drop brackets for the Jeep Cherokee (XJ). The brackets relocate the upper and lower control arms about 3 inches lower and 1/2 inch forward of their factory position. The reduced control arm angle is designed to improve ride and handling on a lifted Cherokee.
Rubicon recommends the brackets for 5.5 inch lifts and describes them as a finished black powder coat part for XJ model Cherokees.
Key features
- Relocates the upper and lower control arms about 3 inches lower and 1/2 inch forward
- Reduced control arm angle, which Rubicon says improves lifted ride and handling
- Recommended for 5.5 inch lifts
- Black powder coat finish
- Rubicon recommends using them with the RE9905 support brackets
Control arm angle basics
Control arms work as hinges and locating links, and their angle changes when the axle is lowered or raised. A steeper angle can increase stress on the joints and bushings, while a flatter angle often gives a smoother ride. Relocating the control arms changes geometry in a way that needs careful checking after the work is finished.
Drop brackets are usually installed alongside other suspension parts, so inspect the bushings, joints and shock mounts while the arms are off. Look for cracks at the bracket welds and loose hardware after the first drives. A wheel alignment should be checked after any change to control arm position.
- Inspect control arm bushings
- Check bracket welds for cracks
- Recheck bolts after first drives
- Align the wheels after installation
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9900 |
| UPC | 614901442243 |
| Product type | Control arm drop bracket |
| Control arm relocation | About 3 inches lower and 1/2 inch forward |
| Recommended lift | 5.5 inches |
| Finish | Black powder coat |
| Vehicle | Jeep Cherokee (XJ) |
Vehicle fitment
This set is for the Jeep Cherokee (XJ), 1984 to 2001.
The brackets are designed for the XJ Cherokee. Compare your year, model and trim with the XJ Cherokee before ordering.
Installation notes
Rubicon recommends using these brackets with the RE9905 support brackets, which are a separate part, on XJ Cherokees. Moving the control arms changes their angle, so have the alignment checked after installation.
What’s included
Check the package contents against your installation before starting, including the hardware.
Not included: The RE9905 support brackets, which Rubicon recommends using with these brackets, are a separate part number.











