Select your vehicle

Rubicon Express Control Arm Geometry Correction Drop Brackets – RE9801

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express RE9801 control arm geometry correction drop brackets
  • Lowers the front control arm angle on a lifted Wrangler JL or Gladiator JT
  • Works with stock or aftermarket control arms and with short arm kits
  • Bolt-on, with no cutting, drilling or welding

Description

Overview

The Rubicon Express R/ERE9801 is a set of geometry correction drop brackets for lifted Jeep Wrangler JL and Gladiator JT models. The brackets move the mounting positions of the front control arms, which Rubicon Express says reduces the control arm angle on a lifted vehicle.

With a lower control arm angle, the arm works less against the coil spring and shock through the suspension cycle. This gives a smoother ride on rough roads and over small obstacles such as rocks and ledges, and it corrects anti-dive, the front end squat under hard braking.

Key features

  • Reduces front control arm angles on a lifted vehicle
  • Smoother ride on rough roads and small off-road obstacles
  • Corrects anti-dive during hard braking
  • Works with the Rubicon Express Short Arm suspension system and other short arm kits
  • Works with stock or aftermarket control arms
  • Bolt-on installation with no cutting, drilling or welding

Setting up after the drop

Changing the control arm mounting position alters the geometry of the front suspension, so the setup should be reviewed once the bracket is in place. A lifted vehicle often runs steeper control arm angles, and reducing that angle changes how the arm loads the spring and shock as the wheel moves.

After installation, check toe and caster and make sure the front alignment is set for the lift. Look for binding at full steering lock and confirm the tires clear the body and the brake lines. Re-torque the bolts after the first few drives, since new mounts can settle under load.

Keep the original hardware in a labeled bag until the new brackets are confirmed. Inspect the control arm bushings for cracking as part of routine maintenance, because worn bushings can change the arm angle over time.

Specifications

Brand Rubicon Express
Part number R/ERE9801
Type Geometry correction bracket
Installation Bolt-on, no cutting, drilling or welding

Vehicle fitment

They fit the 2018 to 2020 Jeep Wrangler JL, including Rubicon, Sport, Sport S, Sahara and Moab models, and the 2020 Jeep Gladiator JT.

They fit the 2018 and 2019 Wrangler JL, and also the 2020 Wrangler JL and 2020 Gladiator JT. Confirm fit for your vehicle’s year, model and trim before ordering.

Because the brackets move the front control arm mounting points, check the control arm angles and steering geometry on a lifted vehicle afterward, and set the alignment to the lift. The brackets are covered under the Advantage Warranty program.

This is a bolt-on installation, so no welding or cutting should be needed. After installation, confirm the control arm angles and front alignment are set for the lift, and recheck arm clearance through full steering lock.

Keep the original hardware in a labeled bag until the new brackets are confirmed to fit, since the bracket change is a parts-level change to the control arm mounts.

What’s included

The geometry correction drop brackets under part number R/ERE9801. Control arms are not included.

Fitment

VehicleYearsTrims
Jeep Gladiator2020Launch Edition, Overland, Rubicon, Sport, Sport S
Jeep Wrangler (JL)2018–2020Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the R/ERE9801 work with aftermarket control arms?

Yes. It works with stock and aftermarket control arms, as well as short arm kits, including the Rubicon Express Short Arm system.

Do these brackets require cutting or welding?

No. It is a bolt-on installation with no cutting, drilling or welding required. The factory arms and the drop bracket can be assembled without welding.

Which years does the R/ERE9801 fit?

It fits the 2018 and 2019 Wrangler JL, plus the 2020 Wrangler JL and the 2020 Gladiator JT. Confirm your vehicle's year before ordering.

Do drop brackets change steering feel?

They can. Changing control arm mounting points shifts the geometry, so steering and alignment may feel different until the setup is checked. Recheck toe and caster after the first few drives.

What should be checked before a trail trip?

Look over the bracket bolts, control arm bushings and clearance at full steering lock. Retighten fasteners after the first few trail runs, since a new bracket can settle under load.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon