Overview
The California Super Trucks CSR-5521B is a front 2.0 non-reservoir shock absorber for 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. It is a gas-charged design for the front suspension.
It is built in the U.S.A. and uses bushing mounts rather than heim joints. Its lift range is w/6 – 7.5 in. Lift, which suits a lifted truck rather than a stock-height setup.
Key features
- Front position, 2.0 non-reservoir design
- Gas-charged construction
- Bushing mounts instead of heim joints.
- All required hardware is included.
- Built in the U.S.A.
Non-reservoir construction
A non-reservoir 2.0 shock keeps the gas charge and oil in one body, which makes it more compact than a reservoir design. The compact body suits installs where there is limited room for a canister, and it keeps the unit tidy on a truck that sees frequent highway use. Its damping must be matched to the spring and tire setup, so a lifted truck can feel firmer.
Look for oil seepage around the shaft, a rebound that does not settle, and bushing wear at both ends. Gas-charged units can lose pressure over time, so a shock that feels soft or noisy after many miles should be checked. Replace worn bushings and mounting hardware along with the shock to keep alignment and ride consistent.
When deciding whether to stay with a non-reservoir shock, consider how the truck is used, the tire size and whether the lift height has changed. A lifted front end can change the angle of the shock, so measure the mounting positions before fitting. Clean the bushings and check the fasteners after the first few drives.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-5521B |
| UPC | 700007522401 |
| Position | Front |
| Design | 2.0 non-reservoir |
| Shock type | Gas charged |
| Lift height | w/6 – 7.5 in. Lift |
| Mounts | Bushings |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 2011–2018 Chevrolet Silverado 2500 HD and 3500 HD in High Country, LT, LTZ and WT trims, and the 2011–2018 GMC Sierra 2500 HD and 3500 HD in Base, Denali, SLE, SLT and WT trims.
Not covered: Silverado 1500 and Sierra 1500 models, and Heavy Duty years outside 2011–2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock mounts with bushings, so factory heim joints do not need to be pressed out. Because the lift range is w/6 – 7.5 in., confirm the fit against your truck’s suspension height before installing.
What’s included
All required hardware is included with the shock.









