Overview
The California Super Trucks CSR-6525 is a rear 2.0 reservoir shock absorber for 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. It is gas charged and has a collapsed length of 19.15, with the unit to be confirmed before ordering.
This is the rear position of the CST reservoir shock series for these trucks. The printed lift range is 10 – 9.5 in., which is also unclear.
Key features
- Rear-position 2.0 reservoir design
- Gas charged
- Collapsed length of 19.15 listed
- Bushing mounts rather than heim joints
Measuring before you buy
Rear shocks on a heavy-duty truck control axle movement under load, so their length matters. Collapsed length is measured from eye center to eye center with the shock fully compressed, and the measurement should be taken at the same mounting points on the old unit. Compare the old shock with the new one in the same condition before ordering, and note the mounting style at both ends.
Worn rear shocks often leak oil down the body, feel soft or bouncy at the rear, and leave the tires cupped in a repeating pattern. Check the bushings and mounting hardware along with the shock itself, since a worn bushing can make a new shock feel loose. Rear springs, sway bar links and shock mounts are often inspected at the same time.
If the truck carries extra weight in the bed or pulls a trailer, the rear end works harder, and replacing both sides together keeps the ride even. Clean the mounting surfaces before reinstalling and check fastener tightness after the first few drives.
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSR-6525 |
| UPC | 70000635820 |
| Position | Rear |
| Type | 2.0 reservoir shock |
| Hydraulic / gas charged | Gas charged |
| Collapsed length | 19.15 (unit not stated) |
| Lift range (as printed) | 10 – 9.5 in. |
| Mounting | Bushings |
Vehicle fitment
The list names the same four HD truck lines from 2011 through 2018: Silverado 2500 HD and 3500 HD and Sierra 2500 HD and 3500 HD.
It fits Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks from 2011 through 2018.
Installation notes
Measure the existing rear shock in its collapsed state before ordering, and confirm the unit matches the 19.15 figure.
What’s included
Required hardware is included with the shock.









