Overview
The Belltech Street Performance rear lowered shock, part number BEL2410FF, is built for trucks and SUVs lowered 4 to 5 inches at the rear. It is sold individually, so a second rear shock is needed for a matched pair. It is a direct fit for the vehicles covered under vehicle fitment.
This Street Performance lowering shock is a ride quality upgrade for today’s trucks and SUVs. Its low speed compression is tuned to control pitch, roll, dive and squat, which helps a sport truck or SUV stay controlled on the road.
Progressive rebound tuning suits large aftermarket wheels and keeps the ride smooth and firm. Construction includes hardened chrome 15 mm piston rods, a triple lip NBR rod seal, a Teflon guide bushing, 35 mm pistons with low friction Teflon seals, and a 55 mm wide body for more oil volume.
Key features
- Rear lowered shock for 4 to 5 inch rear lowering
- Hardened chrome 15 mm piston rods
- Triple lip NBR rod seal
- Teflon guide bushing
- 35 mm pistons with low friction Teflon seals
- 55 mm wide body for increased oil volume
- Metal dust boots
- OEM quality rubber bushings
Matching the rear shocks
Rear shocks control how the axle moves over bumps and how the body rocks under braking and acceleration. When a truck or SUV is lowered, the shock works at a different length and angle, so its damping and mounting geometry both change. Fit shocks in pairs so both sides respond the same way, and check that the eye and stud mounts line up without forcing the bushings.
Worn shocks often show up as fluid on the body, a rear end that keeps bouncing after a dip, or uneven tire wear. Inspect the dust boots and rod seal regularly for dirt or seepage. Lowered vehicles also load the rear suspension differently, so check the springs, bump stops and control arm bushings when replacing shocks.
- Replace rear shocks in pairs
- Inspect boots and rod seals for dirt or leaks
- Check bump stops and bushings when rear drop changes
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL2410FF |
| Position | Rear |
| Rear lowering | 4 to 5 inches |
| Piston rod | Hardened chrome, 15 mm |
| Piston | 35 mm with Teflon seals |
| Body | 55 mm wide body |
| Dust boots | Metal |
| Sold as | Individually |
| Fitment | Direct fit |
Vehicle fitment
It fits 2007–2013 Chevrolet Avalanche, 2002–2006 Chevrolet Avalanche 1500, 2015–2019 Chevrolet Suburban, 2000–2014 Chevrolet Suburban 1500, 2000–2019 Chevrolet Tahoe, 2000–2019 GMC Yukon, 2015–2019 GMC Yukon XL and 2000–2006 GMC Yukon XL 1500 models. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the Silverado or Sierra 1500 pickups, the Colorado or Canyon, or the Dodge trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the length of the shock and its mounts against the 4 to 5 inch rear lowering of your vehicle before installing. Rear shocks are usually replaced in pairs so both sides damp the same way, so fit the second shock at the same time as the first.
What’s included
The product is one rear shock absorber under part number BEL2410FF, with the dust boots and rubber bushings fitted.









