Overview
The Belltech 23323 is a set of rear lowering coil springs for the 2007–2020 Chevrolet Tahoe and GMC Yukon. They lower the rear for a more aggressive stance while keeping ride quality and handling in mind. It is a rear position part.
Each spring is cold wound from chromium alloy steel, then shot peened and powder coated. The fitment covers the Tahoe in its Hybrid, LS, LT, LTZ, PPV, Premier and SSV trims and the Yukon in its Denali, Denali Hybrid, Hybrid, SLE and SLT trims.
Key features
- Cold wound chromium alloy steel springs
- Shot peened for fatigue resistance.
- Powder coated finish
- Designed for lowered ride height and handling
- Rear position
Choosing and fitting lowering springs
Lowering springs change the suspension geometry, so the parts around them should be looked at during the job. Shock absorbers are a common concern, because a shorter spring height changes the extension and compression range the shock works through. Check the shocks for leaks, worn mounts and bottoming-out, and replace them alongside the springs if they are worn. Sway bar links and brake lines should also be checked for clearance at the new height.
Springs are normally replaced in pairs on each axle so the rear sits level side to side. Compare the old springs with the new ones at the same position, and look for sag or cracked coatings on the old set before disposing of it. After the install, drive the vehicle slowly over a few bumps and listen for rubbing or clunking. Recheck the rear height once the vehicle has settled, and set the alignment if the suspension geometry changed.
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL23323 |
| Position | Rear |
| Material | Cold wound chromium alloy steel |
| Finish | Shot peened and powder coated |
| Fitment | Direct fit |
Vehicle fitment
Belltech lists these springs for the 2007–2020 Chevrolet Tahoe in its Hybrid, LS, LT, LTZ, PPV, Premier and SSV trims, and for the 2007–2020 GMC Yukon in its Denali, Denali Hybrid, Hybrid, SLE and SLT trims.
The Suburban, Escalade and other GM models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The springs install at the rear, and the rear ride height should be checked once the install is finished. They are engineered for ride height and handling.





