Overview
The Baer Brakes SS4 Plus is a rear brake system kit, part number 4262689R, built for Ford 9 inch early Big Bearing rear axle housings with a 5 on 4.5 and 4.75 inch bolt circle. It combines a red S4 four-piston caliper with an 11.0 inch two-piece slotted, drilled, zinc-plated rotor, making it a rear disc upgrade for owners of this axle flange.
The kit uses the DR1-C pad type. The calipers are made in Phoenix, AZ from US sourced forged or billet aluminum. It is sized for the early Big Bearing flange rather than general use, so confirm the flange and bolt pattern before mounting.
Key features
- Red S4 four-piston caliper with hard anodized aluminum pistons and stainless steel abutments.
- Dual dust, weather and pressure seals help protect the caliper from road grime and water.
- Two-piece slotted, drilled and zinc-plated rotor with a billet aluminum hat.
- Rotors arrive pre-assembled with NAS high grade stainless hardware.
- Mounting brackets, stainless braided hoses and hardware are supplied with the kit.
- Noise suppression clips and a powder coated caliper finish.
- Designed to fit most 15 inch or larger wheels, with a 15.0 inch minimum wheel diameter.
Before you mount a rear kit
A rear disc kit changes how the axle handles braking, so check the whole assembly before the first drive. Look at the caliper bracket bolts, the rotor face and the hose routing, and confirm the rotor sits flat against the hub before tightening anything. Clean the hub face so the rotor seats fully and runs true.
Rear pads can wear unevenly when a brake upgrade changes the balance between the axles, so inspect them at regular intervals. Replace pads when the friction material gets thin or the wear indicator reaches its limit. Rotors should be measured for thickness and checked for cracks or heat marks whenever the pads are changed.
- Torque the caliper bracket bolts after the first few runs
- Inspect braided hoses for chafing near suspension travel
- Bed in new pads gently before heavy use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262689R |
| UPC | 844165051336 |
| Sold as | Kit |
| Caliper | S4, four-piston, fixed |
| Caliper color | Red |
| Caliper pistons | Hard anodized aluminum |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.020 inch |
| Rotor type | 2-piece, vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled, zinc plated |
| Pad type (FMSI) | DR1-C |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 Lug |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Minimum wheel diameter | 15.0 inch |
| Brake hose | Steel braided, DOT approved |
| Park brake | No |
| Template | S125A |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The kit is built for the Ford 9 Inch Early Big Bearing axle flange, which identifies the rear axle housing rather than a specific truck or car. Confirm that your rear axle housing matches this flange before mounting.
Axle housings with a different flange or bolt pattern are outside this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors come pre-assembled with stainless hardware, so the rear rotor build is already done. Check the S125A template against your chosen wheels before mounting, since wheel style affects clearance. Brake work affects stopping performance, so have the rear system installed and bled by a qualified technician.
What’s included
The kit includes the S4 red calipers, two-piece slotted and drilled rotors pre-assembled with stainless hardware, mounting brackets, stainless braided hoses and hardware.
Not included: Lug nuts and the front rotor. The park brake is also not part of this kit.















