Overview
The Baer Brakes 4302252B brings the Extreme Plus 14-inch rear brake system in black to GM small pattern 10/12 bolt rear ends that have C-clip housing ends, bolted to a 5×4.75 and 5×5 bolt circle. Its black one-piece monoblock caliper, model 6S, is a six-piston floating design.
Park brake shoes sit inside the backing plate, which also carries the caliper mount, so the parking function is part of this kit. Wheels of 18 inches or larger suit the Extreme Plus 14-inch, though fit varies by wheel style, so check the N110P template against your wheel before installation.
Key features
- One-piece monoblock six-piston caliper, model 6S, manufactured in Phoenix, Az
- Caliper built from US-sourced 2618 aluminum forging, CNC machined
- Floating caliper type
- Stainless pistons and abutments paired with noise suppression clips
- Staggered pistons that aim to even out pad wear
- Dual seals rated for dust, weather and pressure
- Two-piece slotted, drilled rotor, zinc plated, with billet aluminum hat and stainless hardware
- Powder coated black finish
Choosing a rear parking setup
The parking brake on a rear kit does more than hold the vehicle on a grade. On many rear setups the shoes also act as a secondary stop, so their condition affects emergency braking as well as parking. Cable routing matters: a cable that binds, kinks or rubs the frame will leave the shoes partly applied and heat the drum. When replacing the cable, match its length to the new backing plate rather than reusing an old cable that has stretched.
Off-road use adds load to the whole system. Mud and water can work into the backing plate and corrode the shoe hardware, so a quick check of the shoe lining and adjuster after wet trails is worthwhile. Pairing this kit with a fresh brake fluid change and a set of quality hoses helps keep the system firm. Test the parking brake on a slight incline before driving the vehicle any distance.
- Adjust the park brake after the cable is installed
- Look for leaks at the caliper and hose fittings
- Clean the backing plate after deep water crossings
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302252B |
| UPC | 844165043065 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | GM 10/12 bolt C-clip, small car pattern |
| Wheel bolt pattern | 5×4.75 / 5×5.00 |
| Lug count | 5 lug |
| Caliper | 6-piston monoblock, model 6S, floating |
| Caliper color | Black |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI number | D1247 |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Park brake | Included |
| Park brake cables | Not included |
| Front rotor included | No |
| Lug nuts included | No |
| Emission code | 6 |
| Template | N110P |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
This black kit is made for GM small pattern 10/12 bolt rear axles with C-clip housing ends. Bearing-on-axle flanges are a different style and fall outside this kit. Match your vehicle’s year, model and trim to this flange before ordering.
Bearing-on-axle housing ends are a different flange and are outside the scope of this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pre-assembled rotors and stainless hoses with hardware arrive in the kit. You will need separate park brake cables plus lug nuts. Confirm the rear housing ends are the C-clip type, then check wheel clearance against template N110P before mounting the calipers. Brake faults can be dangerous, so use a trained installer.
What’s included
The black six-piston monoblock caliper, the backing plate with park brake shoe assembly, the pre-assembled two-piece rotor, and the stainless hoses with hardware.
Not included: lug nuts, park brake cables and the front rotor.















