Overview
Baer Brakes part number 6920917 is a right-side replacement brake rotor with a 13-inch outside diameter and a plain surface finish. It is a 2-piece vented rotor for certain Baer Pro Plus and other Baer brake systems, and it works with the TRACK+ system.
This rotor has a plain surface rather than a slotted or drilled one. It is a single directional rotor made for the right side of the vehicle, cast from iron, and designed with curved vanes that Baer says give optimum cooling.
Key features
- Directional right-side rotor, marked for one side of the vehicle
- 2-piece vented construction
- Plain surface finish
- Curved vane design that Baer describes as optimum cooling
- Built for rotor stability and resistance against distortion
- Dynamically balanced for vibration-free performance
Maintaining a Baer setup
Owners running an existing Baer brake system often replace rotors on a schedule rather than waiting for failure. Because this rotor is designed for certain Baer Pro Plus and TRACK+ applications, keep records of the caliper and pad part numbers used on the same axle. Matching components help the brake balance stay predictable from wheel to wheel.
Rotor life depends on pad choice, driving style and how often the vehicle sees mud, water or towing. Watch for a raised lip at the outer edge, uneven thickness and hot spots, which can cause pulsation. A rotor that is near its minimum thickness should be replaced, as thin rotors overheat faster and can crack under load.
- Log part numbers for each axle
- Replace pads and rotors in matched sets
- Check for pulsation after long descents
- Keep the hub face clean and free of rust
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920917 |
| UPC | 844165012443 |
| Axle position | Right |
| Outside diameter | 13 inch |
| Nominal thickness | 0.81 inch |
| Bolt hole circle diameter | 8.5 inch |
| Bolt hole quantity | 12 |
| Construction | Two piece |
| Surface type | Plain |
| Material | Cast iron |
| Rotor style | Vented |
| Brake surface | Directional |
| ABS tone ring included | No |
| Country of origin | CN |
Vehicle fitment
It is tied to certain Baer Pro Plus systems and the TRACK+ system, so the correct match depends on your Baer brake setup.
Before buying, match the rotor to your Baer system and confirm year, model and trim.
Installation notes
The rotor is directional and made for the right side, so confirm the marking matches the side you are working on. A left-side rotor is a separate part and must be added on the other side. Test the brakes at low speed after fitting them and before normal driving.
What’s included
One right-side replacement rotor.
Not included: the ABS tone ring and a left-side rotor.













