Overview
The Baer Brakes 6920150 is a 1-piece replacement brake rotor with a 12.000 inch outside diameter and 1.020 inch nominal thickness, made for select Baer Brake systems and the rear SS4 systems. It is the right-side, directional version, with a slotted, drilled and zinc-plated braking surface.
The rotor is a vented, full cast design in cast iron, with a curved vane pattern that aids cooling. Its casting is purpose built from premium materials. Each rotor is dynamically balanced for vibration-free performance, and the directional surface means it belongs on the right side only. Rotors are sold individually, so the left side needs its own rotor.
Key features
- Slotted, drilled and zinc-plated braking surface
- Curved vane design that Baer Brakes says aids cooling
- Directional rotor made for the right side of the vehicle
- Dynamically balanced for vibration-free performance
- Full cast, one-piece construction with drum in hat
- Performance grade type with emission code 6
Pairing with pads and hardware
A brake rotor works as one part of a friction system, so its performance depends on the pads, calipers and hub it runs with. Slotted and drilled surfaces are often chosen by drivers who brake hard or repeatedly, but they can wear pads faster and may be louder when cold. Choose pad compounds rated for the rotor type and for the way the vehicle is actually used.
Rotors are usually replaced in pairs or as an axle set, so check the wear on the opposite side before buying. Inspect the braking surface for deep grooves, heat cracks and a pulsing pedal, which point to uneven wear or warping. Measure thickness against the minimum stamped on the old rotor when it is available, and replace the rotor if it is near that limit. Clean the hub face before mounting so the new rotor sits flat.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920150 |
| UPC | 844165051084 |
| Axle side | Right |
| Outside diameter | 12.000 in |
| Nominal thickness | 1.020 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 in |
| Center hole diameter | 2.78 in |
| Overall height | 2.406 in |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface finish | Slotted, drilled and zinc-plated |
| Material | Cast iron |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
It is made for select Baer Brake systems and the rear SS4 systems. Match the rotor to your brake system and axle side before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit this rotor only to the right-side hub, with the directional surface turning in the wheel’s forward direction. Because the rotor is sold individually, a full axle needs a second rotor for the left side. The slotted, drilled surface is a performance design, so pair it with pads that suit that use.
What’s included
One right-side replacement rotor, sold as Each.
Not included: Calipers, brake pads and mounting hardware are separate parts and are not part of this item.












