Overview
The Baer Brakes 6920300 is a right-side, 2-piece replacement brake rotor with a slotted, drilled and zinc-plated finish, made for select Baer Brake systems. It is a vented cast iron rotor measuring 13.15 inches outside diameter and 1.25 inches nominal thickness, sold as each.
It replaces a worn right-hand rotor in a Baer system that uses this size and bolt pattern. The rotor is directional and made for one side of the vehicle only, so this right-side ring belongs on the right. It is a performance-grade part cast from premium materials, with a curved vane design for cooling.
Key features
- Right-side, directional rotor ring
- Two-piece construction with 12 mounting holes on a 7.625 inch bolt circle
- Slotted, drilled and zinc-plated braking surface
- Curved vane design, which Baer describes as optimum cooling
- Designed for rotor stability and resistance against distortion
- Dynamic balanced for vibration-free performance
- Purpose-built castings made from premium materials
Before you install
Brake rotors take the heat and friction of every stop, so a worn ring can cause pulsation, reduced stopping power and uneven pad wear. Before buying a replacement, measure the old rotor’s outside diameter, thickness and hub bolt pattern against the new part, and confirm which side it mounts on. Directional rotors only work on the side they were made for, so check the orientation before the wheel goes on.
Rotors are usually replaced in pairs on the same axle so braking stays even from side to side. Pads, hardware and the hub face should be inspected at the same time, since a worn pad or a rusted hub surface can damage a new ring quickly. Torque the wheel bolts in a star pattern and recheck them after the first few drives. A qualified technician should verify hub fit and the bedding procedure for the pads you choose.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920300 |
| UPC | 844165012337 |
| Axle position | Right |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Outside diameter | 13.15 in |
| Nominal thickness | 1.25 in |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 7.625 in |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is made for select Baer Brake systems. Confirm which Baer system and vehicle take this 13.15 inch right-side rotor before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional, confirm it sits on the right-hand hub before the wheel goes back on. The ABS tone ring is not included, so a system that uses one needs that part moved or sourced separately. Since a rotor carries the braking load, a qualified technician should check orientation and hub fit before reinstalling.
What’s included
One right-side, 2-piece replacement rotor ring, sold individually.
Not included: ABS tone ring.
