Overview
The Baer Brakes 54092-020 is a pair of front Claw performance rotors for the 1999–2004 Ford F-150 Harley-Davidson Edition and the 2002 Lincoln Blackwood. It is a direct replacement rotor for 2WD trucks with five lugs and rear disc or drum brakes, built from 12/99, and it excludes Lightning package trucks.
Each rotor is a one-piece, full-cast vented disc in cast iron with a cross-drilled and slotted friction face. The slots and holes let gas and dust escape from between the pad and rotor during braking. Baer ties this to steadier pedal feel and reduced brake fade, and the chamfered holes are intended to limit stress cracking. The zinc-plated finish shows behind open-center wheels.
Key features
- Slotted and drilled friction face for gas and dust escape
- Enhanced vane structure aimed at cooling and durability
- Mill balanced premium direct replacement design
- Chamfered cross-drilled holes to reduce stress cracking
- Zinc-plated finish for a bright look behind open-center wheels
- ABS tone ring included with the pair
Before you buy
Front rotors work hardest during the first stops of a drive and on long downhill runs, so the rotor face and pads should be chosen as a matched pair. A slotted and drilled face helps clear debris, but it can wear pads at a different rate than a plain face, so confirm pad compatibility before fitting. Bedding in new rotors with a series of moderate stops lets the pad material transfer evenly across the face.
Before ordering, measure the hub and confirm that the lug count and bolt circle match your truck. Inspect the hub face and wheel studs while the wheel is off, and clean any rust from the mating surface so the rotor sits flat. Vibration after installation often traces back to a dirty hub face rather than the rotor itself.
- Match pads to the rotor face before ordering
- Clean the hub face before mounting
- Bed in new rotors with moderate stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 54092-020 |
| UPC | 844165003014 |
| Axle | Front |
| Rotor construction | One piece, full cast, vented |
| Material | Cast iron |
| Surface type | Slotted and cross-drilled |
| Disc finish | Zinc plated |
| Brake surface | Directional |
| Outside diameter | 308.1 |
| Overall height | 104.1 |
| Discard thickness | 24.6 |
| Mounting bolt hole circle diameter | 135 |
| Stud/lug hole quantity | 5 |
| Drive | 2WD |
| ABS tone ring included | Yes |
| Grade type | Premium |
| Emission code | 6 |
| Sold as | Set |
| Country of origin | CN |
Vehicle fitment
It is a direct fit for the 1999–2004 Ford F-150 Harley-Davidson Edition, built from 12/99, with 2WD, rear disc or drum brakes and 5 lugs. It also fits the front position of the 2002 Lincoln Blackwood.
Not covered: F-150 trucks with the Lightning package, standard F-150 trucks outside the Harley-Davidson Edition, and other Lincoln models and years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the ABS tone ring is supplied with the pair, the rotor swap does not call for a separate ring. Pads are not part of this kit. Support the truck on stands and remove the wheel before working on the brakes.
What’s included
A pair of front Claw performance rotors with the ABS tone ring included.
Not included: brake pads and calipers are not part of this kit.
