Overview
The Baer Brakes DR1-N is a four-pad kit of race-compound disc brake pads for Baer S4 brake systems, aimed at track day events and other performance driving. Baer positions these pads as a more aggressive option than the pads supplied with its Big Brake Kits.
The pads are made for the four-piston S4 caliper design used on S4 Deep Stage Drag Race systems. They can be run on the street, but the firmer compound makes more noise and dust than a standard pad. Track use puts heavy heat into both pads and rotors, so check rotor surfaces for heat checking, scoring or blue discoloration after each session.
Key features
- Replacement pad designed for the S4 four-piston caliper.
- High friction race compound suited to race use and performance driving.
- Expect higher noise and dust levels than standard Baer pads.
- Semi-metallic friction material on a black backing plate.
- Premium grade pad supplied as a kit of four pads.
- Sold as a kit; caliper hardware is not part of the pad kit.
Bedding in race pads
Race compound pads perform best once they reach working temperature, and the first few sessions set the friction surface. Make a series of moderate stops from a lower speed to transfer an even layer of pad material onto the rotor. Hard stops from high speed before the layer forms can cause uneven braking and vibration.
After each track session, look at the rotor for heat checking, scoring and blue discoloration, and check the pads for cracking, glazing or uneven wear. A pad that has overheated may need replacing before the next event, even when some friction material remains.
- Let brakes cool fully before handling pads or rotors
- Keep pad faces clean of grease and debris
- Recheck caliper bolt torque after the first few sessions
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | DR1-N |
| UPC | 844165030867 |
| Sold as | Kit |
| Caliper series | S4 |
| Pad type | Race |
| Friction material | Semi-metallic |
| Grade | Premium |
| Pads per set | 4 |
| Box count | 1 |
| Backing plate color | Black |
| Slotted | No |
| Pad shims included | No |
| Abutment clips included | No |
| Bolts included | No |
| Mounting hardware included | No |
| Brake lubricant included | No |
| Pad wear sensor included | No |
| Wear indicator attached | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
No vehicle fitment is confirmed for the DR1-N from this part alone. The pad is built for the S4 four-piston caliper, which belongs to the S4 series for General Motors 78-88 G-Body cars with 11 Inch SS4+ front systems. Confirm your caliper and your vehicle’s year, model and trim before ordering.
Fitment cannot be confirmed for a specific model from this part alone, so do not assume it fits a car because of the series label. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Abutment clips, pad shims, bolts, mounting hardware, brake lubricant and the pad wear sensor are not included, so gather your current hardware before starting. Caliper hardware with 8 pad abutments is sold separately. Race compound pads grip harder once heated, so bed them in with a series of moderate stops and avoid hard stops from speed until the pedal feels firm. Brakes are safety-critical, so have a qualified technician inspect the installation.
What’s included
The kit contains four Baer race brake pads, sold as a set of four.
Not included: caliper hardware (8 pad abutments), abutment clips, pad shims, bolts, mounting hardware, brake lubricant and the pad wear sensor.











