Overview
The Baer Brakes D1304 is a set of rear ceramic Claw brake pads for the 2007–2021 Toyota Tundra, 2008–2022 Toyota Sequoia, 2008–2011 and 2013–2021 Toyota Land Cruiser, and 2008–2011 and 2013–2021 Lexus LX570. Each set holds four pads for the rear axle.
Baer Claw pads use a ceramic friction compound meant to give steady stopping power with little dust and noise. Baer presents them as an OE-style replacement for daily drivers, with long pad life and low rotor wear. The pads are slotted and arrive with mounting hardware and pad shims.
Key features
- Ceramic friction compound for consistent wear and performance
- Minimal noise and dust in everyday driving
- Long pad life with low rotor wear
- Premium grade, OE-style replacement for daily-driven trucks and SUVs
- Slotted pad face with mounting hardware and pad shims included
Rear brake pad service tips
Toyota and Lexus full-size trucks and SUVs carry heavy loads and tow, so rear brake pads see steady use even when the front brakes do most of the work under hard stops. A ceramic compound suits daily driving where quiet operation and low dust matter, and it keeps friction consistent across a range of temperatures. Pads alone do not decide how the brakes feel; rotor condition, caliper slide movement and fluid quality all shape the pedal response after a pad change.
Before installing, clean the caliper bracket and check that the slides move freely. Rear pads on these models are often replaced alongside rotors when the surface shows scoring, heat cracks or uneven thickness. Bedding the new pads with a series of moderate stops helps transfer an even layer of friction material to the rotor. Check the pads at each tire rotation for uneven wear, a glazed face or a backing plate that shows corrosion, and replace both sides together.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D1304 |
| FMSI number | D1304 |
| UPC | 844165051589 |
| Pads per set | 4 |
| Axle | Rear |
| Friction material | Ceramic |
| Grade type | Premium |
| Backing plate color | Black |
| Slotted | Yes |
| Mounting hardware included | Yes |
| Pad shims included | Yes |
| Abutment clips included | No |
| Brake lubricant included | No |
| Pad wear sensor included | No |
| Wear indicator attached | No |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
The D1304 fits the rear axle of the 2007–2021 Toyota Tundra, the 2008–2022 Toyota Sequoia, the 2008–2011 and 2013–2021 Toyota Land Cruiser, and the 2008–2011 and 2013–2021 Lexus LX570. The Land Cruiser and LX570 have no 2012 model year.
These pads do not cover front brakes, or Sequoia, Tundra, Land Cruiser or LX570 generations outside the years above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pad shims and mounting hardware come with the set, so the pads install with the hardware supplied. Brake lubricant is not included, so keep a suitable lubricant ready for the caliper slide and contact points. Replace both rear pads together so braking stays even from side to side. Brake work involves hydraulic and wheel-end parts, so have a qualified technician install these pads if you are not experienced with brakes.
What’s included
Four rear brake pads per set, with mounting hardware and pad shims.
Not included: brake lubricant, abutment clips and a pad wear sensor. Brake rotors are not part of this set.
