Overview
The Baer Brakes IronSport 4262107 is a rear disc brake conversion kit for Ford 9 inch Early Big Bearing rear ends. It replaces rear drum brakes with a single piston caliper and an 11.65 inch rotor.
The kit has a silver zinc-plated caliper, a one-piece iron rotor that is slotted and drilled, and an integral park brake built into the caliper. Five-lug wheel patterns of 5×4.50 and 5×4.75 are supported, with a minimum wheel diameter of 15.0 inch. Wheel styles vary widely, so confirm clearance against your specific wheel with template V107I before installing.
Key features
- Single piston floating caliper in silver zinc-plated finish
- One-piece iron rotor, 11.65 inch diameter, vented
- Slotted, drilled and zinc-plated friction surface
- Integral park brake built into the caliper
- Braided brake hoses and fittings included, with DOT approved hose
- Template V107I for checking wheel fit
- Five-lug 5×4.50 and 5×4.75 bolt patterns
Before you buy
Drum-to-disc conversions change how the rear axle is set up, so the wheel, axle flange and parking function all need to work together. A rear disc setup moves braking force to a caliper clamping a rotor at the hub, which changes heat load and pad wear compared with the drums it replaces. Fit is usually the first hurdle: the axle flange style, bolt pattern and wheel backspacing decide whether the rotor and caliper clear the spokes or barrel.
Hydraulic lines and the master cylinder should be bled and checked, and any valving changes should be reviewed for the whole braking system. Rear pad choice matters on a vehicle that also sees off-road use, since mud and grit load the friction surface quickly. Park brake function in a caliper-integrated design depends on cable routing and adjustment, which is why the cables are sourced separately.
- Check wheel clearance with the template before mounting tires
- Inspect brake lines for chafing after the first trail run
- Replace drum hardware kits if old parts are reused
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262107 |
| UPC | 844165007579 |
| Sold as | Kit |
| Caliper type | Single piston, floating |
| Caliper finish | Silver zinc-plated |
| Rotor diameter | 11.65 inch |
| Rotor style | Vented, slotted and drilled |
| Rotor construction | One-piece |
| Rotor material | Iron |
| Lug count | 5 |
| Wheel bolt pattern | 5×4.50 and 5×4.75 |
| Minimum wheel diameter | 15.0 inch |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Brake hose | DOT approved, braided |
| Pad FMSI number | D0627 |
| Template | V107I |
| Integral park brake | Yes |
| Park brake cables included | No |
| Lug nuts included | No |
| Front rotor included | No |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 inch rear axles with the Early Big Bearing axle flange and five-lug wheels on 5×4.50 or 5×4.75 patterns. Confirm fit for your vehicle’s year, model and trim before ordering.
Other Ford 9 inch flange styles fall outside this kit’s design. Match your axle housing and wheel pattern to the dimensions above before ordering.
Installation notes
The park brake is built into the caliper, but park brake cables are not included and must be supplied separately. Use Baer’s template V107I to compare rotor and caliper clearance with the wheel you plan to run, because Baer cannot guarantee fit across wheel styles. Brake work is safety critical, so have the finished installation checked by a qualified brake technician.
What’s included
Calipers, rotors, brackets, hardware, brake hoses and fittings are included.
Not included: park brake cables, lug nuts and a front rotor.












