Overview
The Baer Brakes SS4 Plus 13.0 inch rear brake kit, part number 4262262B, is a black rear disc brake system for Ford 9 inch early Big Bearing axles with a 5×5.00 wheel bolt pattern. It combines a four-piston S4 caliper with a vented two-piece slotted, drilled rotor and a park brake shoe assembly housed in Baer’s backing plate.
Owners running 17 inch or larger wheels can use this kit as a performance option for the early Big Bearing rear end. The match depends on the axle flange and the 5×5.00 bolt pattern.
Key features
- Four-piston S4 caliper with a black powder coated finish
- Billet aluminum hat on the two-piece rotor, which is slotted, drilled and zinc plated
- CNC machined caliper built in Phoenix, Az
- Dual seals and hard anodized pistons for dust, weather and pressure resistance
- Backing plate carries the one-piece park brake shoe assembly
Pad selection and rotor wear
Pad choice shapes how the system behaves cold and hot. A performance pad matched to the caliper’s pad type gives steadier bite on repeated stops, while a softer compound may fade sooner under heavy use. Match the pad type to how the vehicle is driven, then bed the new pads in gradually before hard braking.
A two-piece rotor with a billet hat is serviced by replacing the friction ring when worn, though the hat and hardware are often reused. Watch for grooves deeper than the surface drilling, pulsation through the pedal and squealing that does not stop after bedding. Those signs point to rotor or pad wear that should be checked before continued driving.
- Pad compound matched to driving style
- Rotor thickness against its minimum wear limit
- Hardware torque after the first trail runs
- Hose condition and fluid level at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262262B |
| UPC | 844165028437 |
| Caliper | S4, four-piston, fixed |
| Caliper color | Black |
| Rotor type | Two-piece, slotted, drilled, zinc plated |
| Rotor design | Vented |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor material | Iron with aluminum hat |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | Ford 9 inch early Big Bearing |
| Pad type | DR1-C |
| Template | S135H |
| Park brake | Included; park brake cables not included |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
No vehicle is named for this kit. It targets Ford 9 inch early Big Bearing rear axles with a 5×5.00 wheel bolt pattern. Wheel clearance should be checked against the S135H template because wheel styles vary.
The kit targets Ford 9 inch early Big Bearing rear axles with a 5×5.00 wheel bolt pattern.
Installation notes
Rotor and hardware arrive pre-assembled, and the stainless hardware is NAS high grade. Park brake cables are not part of this kit, so the parking function needs them sourced separately. Lug nuts are also excluded. Brake work is safety critical, so a qualified technician should complete the install.
What’s included
Pre-assembled two-piece rotor, S4 four-piston caliper, backing plate with one-piece park brake shoe assembly, and braided hoses with hardware.
Not included: park brake cables, lug nuts and front rotor.















