Overview
The Baer Brakes 2000056RP is a gray anodized, adjustable proportioning valve with an integrated mount, designed for the right port exit arrangement of the Baer ReMaster master cylinder. The valve bolts up beneath the ReMaster so the brake plumbing stays short, with the rear circuit controlled by the valve and the front circuit passed straight through.
Removable brass seats let installers choose between inverted flare fittings and straight banjo fittings. The package holds one valve, four tube nuts and two mounting bolts, the body is aluminum with laser etched markings, and the part is made in the USA.
Key features
- Right side port exit with rear in/out ports and a pass-through for the front circuit.
- Integrated mounting block sits beneath the ReMaster master cylinder.
- Removable seats allow inverted flare or straight banjo fittings.
- 3/8-24 thread: inverted flare with included brass seats, or banjo without seats.
- Knob-style adjustment on an adjustable valve type.
- Gray anodized aluminum body with laser etched markings.
- Made in the USA.
Choosing a proportioning setup
A proportioning valve limits pressure to the rear brakes once the system reaches a set level, so the rear axle is less likely to lock before the front under hard braking. On a vehicle fitted with larger front brakes or a different master cylinder, the rear balance often changes, and the valve setting needs to match the new front-to-rear ratio. Adjustment works best on a level surface with the brakes at operating temperature, and small changes make the result easier to judge on the road.
Because the valve sits in the brake line, it is worth checking the hoses, fittings and seats whenever the valve is removed or the system is bled. Look for seepage at the tube nut connections, weeping around the adjustment knob, and any sign that the mounting bolts have loosened after hard use. Brake fluid absorbs moisture over time, so keeping the reservoir sealed and replacing fluid on the schedule set by the vehicle maker helps the valve and the rest of the system work as intended.
- Check tube nuts for seepage after the first drives
- Inspect brass seats whenever the fitting style changes
- Re-check mounting bolts after the first few hard stops
- Keep the reservoir sealed and brake fluid fresh
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000056RP |
| UPC | 844165052036 |
| Series | Remaster |
| Valve type | Adjustable, knob adjustment |
| Port exit | Right side |
| Inlet port size | 3/8-24 inch, quantity 2 |
| Outlet port size | 3/8-24 inch, quantity 2 |
| Mounting holes | 2 |
| Mounting block | Integrated |
| Fittings | 3/16 inch inverted flare with tube nut and brass seat, or banjo without brass seat |
| Removable seats | Yes |
| Material | Aluminum |
| Finish | Gray anodized |
| Color | Gray |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is designed to mount under the Baer ReMaster master cylinder, so it is intended for brake setups that use that master cylinder.
Installation notes
Fasten the valve through the integrated block under the ReMaster with the two included mounting bolts. Connect the 3/8-24 ports using inverted flare fittings with brass seats, or straight banjo fittings with the seats removed. Brake modifications affect stopping performance, so a qualified technician should verify the proportioning setting and bleed the system afterward.
What’s included
One proportioning valve, four tube nuts, four brass seats and two mounting bolts.
Not included: A pressure switch, bleeder hardware and a warning light connector are all absent from this package.














