Overview
The Baer Brakes 2000058RP is a polished, right-port adjustable proportioning valve with an integrated mount, designed to sit directly under the Baer Remaster master cylinder. A proportioning valve sets how much hydraulic pressure reaches the rear brakes compared with the front, and this unit is machined so the valve and master cylinder form one compact assembly.
The valve has in and out ports for the rear circuit, which it controls, plus a pass-through for the front circuit, so the plumbing can stay short and tidy. Removable brass seats let you run inverted flare or straight banjo fittings. The body is aluminum with a polished finish, and the port exit faces the right side. It suits builders who already run a Remaster master cylinder and want a valve that matches it both visually and mechanically.
Key features
- Adjustable valve with knob adjustment for setting rear brake pressure
- Integrated mounting block with two mounting holes for placement beneath the Remaster
- Right-side port exit with in and out rear ports and a front pass-through
- Removable brass seats for inverted flare or straight banjo fittings
- Laser etched body, made in the USA
- Polished aluminum finish that matches the Remaster series
Matching valve and master cylinder
A proportioning valve works alongside the master cylinder, which sends fluid to both brake circuits. Limiting pressure to the rear brakes helps keep the rear wheels from locking early during hard stops, and the knob lets you tune that balance. Adjustment matters most after tire size, pad compound or vehicle weight changes, since those shift how much rear braking the chassis can use.
Because this valve mounts beneath the master cylinder, the two parts are usually inspected together. Look for seepage at the fittings, a soft pedal that does not firm up, or fluid residue on the mounting block. Any of these signs point to a seal or fitting problem that should be repaired before the brakes are used again.
- Check every fitting for seepage after the first drive
- Re-check the mounting bolts after initial use
- Keep brake fluid clean and at the correct level
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000058RP |
| UPC | 844165052012 |
| Series | Remaster |
| Valve type | Adjustable, knob adjustment |
| Port exit | Right side |
| Inlet ports | 2 at 3/8-24 inch |
| Outlet ports | 2 at 3/8-24 inch |
| Fittings | 3/16 inch inverted flare and tube nuts with brass seat, or banjo without seat |
| Mounting holes | 2 |
| Mounting block | Integrated |
| Removable seats | Yes |
| Material | Aluminum |
| Finish | Polished |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The valve is built to match the Baer Remaster master cylinder and is intended for brake setups that use it. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes two mounting bolts, four tube nuts and four brass seats. Choose inverted flare or straight banjo connections for each port, and remove the seats when banjo fittings are used. Confirm which side the right-side port exit faces before routing lines, since that decides how the rear lines leave the valve. Have a qualified technician check the brake system after any line work.
What’s included
One adjustable proportioning valve with integrated mount, four tube nuts, two mounting bolts and four brass seats, sold individually.
Not included: Bleeder screw, bleeder hoses, brake pressure switch, and warning light connector.














