Overview
The Baer Brakes 2000058LP is a polished, left-port adjustable proportioning valve with an integrated mount, designed for the Baer Remaster master cylinder. Proportioning valves limit how much pressure reaches the rear brakes compared with the front, and this one is machined to sit directly beneath the Remaster so the assembly stays compact.
Its port exit faces the left side. The valve controls the rear in and out ports, while a pass-through port carries the front circuit, which keeps the plumbing short and orderly. Removable brass seats let installers use either inverted flare or straight banjo fittings. Choose this version when the left side is where your lines need to exit, and when you want a polished aluminum valve that pairs with a Remaster master cylinder.
Key features
- Left-side port exit to match a left-port Remaster layout
- Rear in and out ports plus a front pass-through
- Removable brass seats for inverted flare or straight banjo fittings
- Integrated mounting block with two mounting holes
- Adjustable valve with knob adjustment
- Laser etched aluminum body, made in the USA
Left port layouts and line routing
Choosing a left port exit is mostly a question of where the rear lines need to leave the valve. Plan the route before cutting any tubing, since the outlet direction decides how much bend each line needs. Clean, short runs with gentle curves are easier to inspect later for chafing or leaks.
Inverted flare and banjo connections call for different preparation, so settle on one type per port before work starts. Using the included brass seats keeps flare connections seated correctly, while banjo fittings need the seats removed. Mixing the two methods on the same port is a common source of leaks.
- Mark line routes before cutting any tubing
- Use a flare tool made for brake tubing
- Keep lines clear of hot exhaust and moving suspension parts
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000058LP |
| UPC | 844165052005 |
| Series | Remaster |
| Valve type | Adjustable, knob adjustment |
| Port exit | Left side |
| Inlet ports | 2 at 3/8-24 inch |
| Outlet ports | 2 at 3/8-24 inch |
| Fittings | 3/16 inch inverted flare and tube nuts with brass seat, or banjo without seat |
| Mounting holes | 2 |
| Mounting block | Integrated |
| Removable seats | Yes |
| Material | Aluminum |
| Finish | Polished |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The valve is built around the Remaster master cylinder and is intended for brake setups that use it. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two mounting bolts secure the integrated block, and four tube nuts come with four brass seats. Decide between inverted flare and banjo connections before cutting any line, because the removable seats change which fitting type each port accepts. Check the left-side port exit against your line routing before final tightening. Brake repairs should be verified by a qualified technician before the vehicle is driven.
What’s included
One valve with integrated mount, four tube nuts, two mounting bolts and four brass seats, sold individually.
Not included: Bleeder screw, bleeder hoses, brake pressure switch, and warning light connector.














