Overview
The Baer Brakes 2000057LP is a black anodized, adjustable proportioning valve with an integrated mount, built for the left port exit layout used with the Baer ReMaster master cylinder. It is machined to mount directly under the ReMaster, giving a compact brake plumbing layout in which the valve controls the rear outlets and passes the front circuit straight through.
The valve has removable brass seats, so installers can use inverted flare fittings or straight banjo fittings. The package includes four tube nuts and two mounting bolts, the body is aluminum with laser etched markings, and the valve is made in the USA.
Key features
- Left side port exit with rear in/out ports and a pass-through for the front circuit.
- Integrated mounting block for installation beneath ReMaster master cylinders.
- Removable seats allow either inverted flare or straight banjo fittings.
- 3/8-24 thread: inverted flare with included brass seats, or banjo without seats.
- Knob-style adjustment on an adjustable valve type.
- Black anodized aluminum body with laser etched markings.
- Made in the USA.
Adjusting and bleeding after install
Once the valve is mounted and the lines are connected, the proportioning setting should be checked before normal driving. The knob changes how much pressure reaches the rear brakes, so small adjustments are easier to judge than large ones. Test brake feel at low speed in an open area before using the vehicle on public roads.
Any time a brake line is opened, air can enter the system. Bleeding removes that air and restores a firm pedal. Work in the sequence a service manual or qualified technician specifies, and keep the reservoir topped up so air is not drawn back in.
- Check pedal feel before driving on public roads
- Keep the brake fluid reservoir topped up while bleeding
- Test brakes at low speed in an open area first
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000057LP |
| UPC | 844165052043 |
| Series | Remaster |
| Valve type | Adjustable, knob adjustment |
| Port exit | Left side |
| Inlet port size | 3/8-24 inch, quantity 2 |
| Outlet port size | 3/8-24 inch, quantity 2 |
| Mounting holes | 2 |
| Mounting block | Integrated |
| Fittings | 3/16 inch inverted flare with tube nut and brass seat, or banjo without brass seat |
| Removable seats | Yes |
| Material | Aluminum |
| Finish | Black anodized |
| Color | Black |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
The valve is designed around the Baer ReMaster master cylinder, so it is intended for brake setups built on that master cylinder. Confirm your year, model and trim before ordering.
It is meant for use with the ReMaster master cylinder it was designed around.
Installation notes
Bolt the valve to the integrated block beneath the ReMaster using the two included mounting bolts. Plumb the 3/8-24 ports with inverted flare fittings and brass seats, or with straight banjo fittings after the seats are removed. Brake work carries real risk, so have a qualified technician check the proportioning setting and bleed the system.
What’s included
One proportioning valve, four tube nuts, four brass seats and two mounting bolts.
Not included: Pressure switch, bleeder screw and bleeder hoses must be sourced separately, and the valve has no warning light connector.














