Overview
The Baer Brakes 2000057RP is a black anodized, right-port adjustable proportioning valve with an integrated mount for the Baer Remaster master cylinder. It is the black-finish member of the Remaster family, pairing a valve that controls rear brake pressure with a mounting block that sits beneath the master cylinder.
Ports are 3/8-24 inch, with rear in and out ports and a front pass-through. The port exit is on the right side. Removable brass seats support inverted flare and straight banjo fittings, and the body carries a laser etched finish. Builders who want a black valve to sit under a Remaster master cylinder will find this version fits that purpose.
Key features
- Black anodized aluminum finish
- Right-side port exit
- Integrated mounting block with two mounting holes
- Removable brass seats for inverted flare or banjo fittings
- Adjustable valve with knob adjustment
- Laser etched body, made in the USA
Matching the valve to the system
A proportioning valve limits how much hydraulic pressure reaches the rear brakes once the front circuit begins to build pressure, which helps keep the rear wheels from locking before the front during firm stops. Because the valve sits in the rear circuit, its setting interacts with the master cylinder, line sizes and rear brake components, so a change at one point affects the others. Anyone adding a valve to a custom setup should understand how the two circuits balance together.
Before ordering, check the port layout and fitting type against the lines already on the vehicle, since inverted flare and banjo connections call for different hardware. Valve bodies can develop corrosion or seep at the seats over time, so look for moisture around fittings and stiff knob movement during periodic inspection. Replace brake fluid on schedule, and have a technician bleed the circuit after any valve change.
- Confirm fitting type before buying lines
- Look for seepage around seats and fittings
- Replace fluid when the valve is serviced
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000057RP |
| UPC | 844165052050 |
| Series | Remaster |
| Valve type | Adjustable, knob adjustment |
| Port exit | Right side |
| Inlet ports | 2 at 3/8-24 inch |
| Outlet ports | 2 at 3/8-24 inch |
| Fittings | 3/16 inch inverted flare and tube nuts with brass seat, or banjo without seat |
| Mounting holes | 2 |
| Mounting block | Integrated |
| Removable seats | Yes |
| Material | Aluminum |
| Finish | Black anodized |
| Color | Black |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The valve is built to match the Baer Remaster master cylinder rather than a specific vehicle year or model. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two mounting bolts and four tube nuts are included with four brass seats. Keep the seats in place for inverted flare lines and remove them when you use banjo fittings. Because the integrated block sits directly beneath the master cylinder, line alignment should be checked before final tightening. A qualified technician should test the brake system once line work is done.
What’s included
One adjustable proportioning valve with integrated mount, four tube nuts, two mounting bolts and four brass seats.
Not included: Bleeder screw, bleeder hoses, brake pressure switch, and warning light connector.














