Overview
The Baer Brakes Claw front rotor set, part number 55090-020, is a pair of zinc-plated, cross-drilled and slotted replacement front rotors. It fits the 2004–2008 Chevrolet Colorado, the 2004–2008 GMC Canyon and several Isuzu i-series models, including the Isuzu i-290 and i-370 for 2007–2008 and the Isuzu i-350 for 2006.
Each rotor is a direct replacement for the original front rotor. The slotted and drilled face lets gases and dust escape from between the pad and rotor during braking, which supports steadier pedal feel and less brake fade. The zinc-plated finish suits open center wheels.
Key features
- Slotted and drilled friction surface that releases gases and dust from the pad-to-rotor contact
- Enhanced vane structure and premium materials, described by the maker for cooling and durability
- Mill balanced, direct replacement design supplied in pairs
- Chamfered cross-drilled holes intended to reduce stress cracking
- Zinc-plated finish for open center wheels
- Vented rotor with a directional brake surface
Brake pad compatibility
Pads for a light truck should be selected with the rotor in mind, since a pad that grips too hard can heat a thin rotor faster than expected. Ceramic pads run quieter and produce less dust, while semi-metallic pads handle higher heat loads, especially when towing.
Front rotors on these trucks often wear in step with the pads, so replacing one without the other usually leads to a short second life. Check the caliper slide pins for free movement, since a seized pin can cause one-sided wear.
Keep the rotor surface clean of oil and brake fluid during installation. Contamination can cause squeal and reduced stopping power on the first stops.
- Choose pads rated for the vehicle’s typical load
- Replace the rotor and pads as a set on the same axle
- Inspect the brake hose for cracks while the wheel is off
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 55090-020 |
| UPC | 844165003755 |
| Axle | Front |
| Rotor construction | One piece, full cast |
| Material | Cast iron |
| Surface type | Slotted x drilled |
| Solid or vented | Vented |
| Brake surface | Directional |
| Disc finish | Zinc plated |
| Stud/lug hole quantity | 6 |
| Mounting bolt hole circle diameter | 112 |
| Outside diameter | 280.16 |
| Overall height | 32 |
| Discard thickness | 25.6 |
| Emission code | 6 |
| Grade type | Premium |
| ABS tone ring included | No |
| Sold as | Set |
| Country of origin | CN |
Vehicle fitment
The rotor fits the front position on the 2004–2008 Chevrolet Colorado, the 2004–2008 GMC Canyon, the 2007–2008 Isuzu i-290, the 2007–2008 Isuzu i-370 and the 2006 Isuzu i-350.
This part is for the front axle only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The Colorado and Canyon share one fit group, and the Isuzu i-series entries form a separate group, so match your truck to the correct group before fitting. The rotor has six lug holes on a 112 bolt circle, a useful check against your hub. Brake rotor work affects stopping ability, so have a qualified technician inspect the pads, calipers and hub during the job.
What’s included
The kit includes a pair of direct replacement Claw front rotors.
Not included: The ABS tone ring, which is not included with this set.














