Overview
The Baer Brakes 6910526 is a one-piece, full cast left replacement brake rotor with a slotted, drilled and zinc-plated surface. It measures 14.000 inch outside diameter by .799 inch nominal thickness, and it is made as a replacement for select Baer Brake systems. Each unit is sold as one rotor.
The rotor uses a six-stud pattern on a 5.50 inch bolt circle, with a 3.094 inch center hole that serves as the register. Its overall height is 3.366, and the drum in hat design places a drum section inside the rotor hat. The brake surface is directional and vented, so it is made for the left side only.
Key features
- One-piece full cast construction
- Slotted, drilled and zinc-plated surface
- Drum in hat design
- Six-stud mounting pattern on a 5.50 inch bolt circle
- Curved vane design that Baer Brakes says aids cooling
- Dynamic balanced for vibration-free running
- Vented rotor type with a directional brake surface
- Performance grade
Drum in hat rotors
A drum in hat rotor combines a disc friction surface with a drum section inside the hat, so the mounting face and the drum must work together. Before fitting one, look at whether the parking brake shoes, drum diameter and hub clearance match the rotor design. Mixing a drum in hat rotor with a standard hub often leads to rubbing or a poor seat.
Because the hat and drum are cast together, the rotor is usually replaced as a complete unit rather than resurfaced in place. Inspect the drum surface for grooves, cracks or hard spots, and check the hat for corrosion where it meets the hub. Keep the register clean so the rotor centers properly on the hub.
- Confirm the parking brake setup matches the drum
- Clean the register and hub face before fitting
- Check the drum surface for grooves or cracks
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910526 |
| UPC | 844165049876 |
| Outside diameter | 14.000 inch |
| Nominal thickness | .799 inch |
| Stud or lug hole quantity | 6 |
| Stud or lug hole circle diameter | 5.50 inch |
| Center hole diameter | 3.094 inch |
| Overall height | 3.366 |
| Axle side | Left |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Rotor type | Vented |
| Brake surface | Directional |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems. Confirm the 14.000 inch diameter, six-stud pattern on a 5.50 inch bolt circle and 3.094 inch center hole against your hub, and confirm the year, model and trim of your vehicle before purchase.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional and uses a drum in hat design, confirm both the side and the drum configuration against your brake system before mounting. The ABS tone ring is not included. A mismatched drum or wrong-side rotor can compromise stopping performance, so have a qualified technician complete the job.
What’s included
One left-side, one-piece full cast replacement rotor with a slotted, drilled and zinc-plated surface, sold as each.
Not included: ABS tone ring.
