Overview
The Baer Brakes D1691B is a set of rear Claw brake pads for the 2012–2022 Ford F-250 Super Duty, the 2013–2022 Ford F-350 Super Duty and the 2013–2016 Ford F-450 Super Duty. The set holds four pads and carries the FMSI number D1691.
The Claw is designed for steady braking with low noise and dust, and it suits everyday work trucks. Baer Brakes markets it with a ceramic compound, while the friction material is semi-metallic. Fit depends on drive type, rear wheel setup and front suspension, so check those details before ordering.
Key features
- Replacement pad designed to match OE wear and performance, with low noise and dust
- Premium grade pad marketed with a ceramic compound for long, consistent life
- Low rotor wear and a balanced ride for everyday driving
- Stainless steel abutment clips included with most applications
- Slotted pad with a black backing plate and pad shims
Working the rear brakes
Rear pads do a larger share of the work on a loaded work truck than many owners expect, especially when towing or carrying heavy loads over long grades. Pad friction material, rotor surface and caliper condition all affect how evenly the rear axle slows the truck. Matching the pad compound to how the truck is used helps keep braking predictable across the conditions you drive in.
When rear pads are replaced, it is a good time to check the rest of the rear brake system. Look at rotor thickness, surface condition and runout, and inspect the calipers, slide pins and brake hoses for leaks, cracks or sticking. Worn hardware and seized pins can cause uneven pad wear even on a new set.
- Check rotor thickness and runout before fitting new pads
- Clean and lubricate caliper slide pins as the service manual directs
- Bed in new pads with a series of moderate stops
- Replace shims and clips that are corroded or damaged
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | D1691B |
| FMSI number | D1691 |
| UPC | 90127474419 |
| Position | Rear axle |
| Drive | 2WD and 4WD |
| Pads per set | 4, sold as a set |
| Friction material | Semi-metallic |
| Compound (marketing) | Ceramic |
| Grade | Premium |
| Slotted | Yes |
| Backing plate color | Black |
| Emission code | 6 |
| Abutment clips included | Yes |
| Pad shims included | Yes |
| Mounting hardware included | No |
| Pad wear sensor | Not included |
| Wear indicator | Not attached |
| Brake lubricant included | No |
| Country of origin | USA |
Vehicle fitment
The set fits 2012–2022 Ford F-250 Super Duty trucks from 10/22/12 in RWD and 4WD. It fits 2013–2022 Ford F-350 Super Duty trucks with single or dual rear wheels, excluding 15–16 wide track front suspension. It fits 2013–2016 Ford F-450 Super Duty trucks with 8-lug wheels.
The F-350 listing excludes trucks with 15–16 wide track front suspension. The F-150 and F-550 are not covered, and F-450 model years after 2016 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The F-350 and F-450 listings depend on rear wheel setup and wheel count, so match the set to your truck’s single or dual rear wheels before fitting. Mounting hardware and the pad wear sensor are not included, so check whether your installation needs separate hardware first. Work trucks that tow put more load on the rear brakes, so inspect rotor thickness and runout and check brake lines and hoses when the pads change. Brake pads are safety-critical, so have a qualified technician fit them if you are unsure.
What’s included
Four rear Claw pads with stainless steel abutment clips and pad shims.
Not included: mounting hardware, pad wear sensor, and brake lubricant.












