Overview
The Baer Brakes 6801179 is a 6P rear caliper rebuild kit that services one rear 6P brake caliper. It supplies the pressure seals, weather seals, pad abutment clips, banjo crush washers and bleeder dust cap needed to overhaul that caliper, with O-rings sized for pistons of 1.1875, 1.125 and 1.000 inch diameter.
The kit is packed as a single set and is made in the USA. Confirm the caliper type and piston sizes against the caliper you already have before ordering.
Key features
- EPDM rubber pressure and weather seals for the 6P caliper
- Stainless steel brake pad abutment clips
- New banjo crush washers for the banjo fittings
- Bleeder dust cap included
- Square-rim O-rings with 1.1875, 1.125 and 1.000 inch inside diameters
- Services one caliper per kit
Before the rebuild
A rear caliper rebuild starts with full disassembly. Remove the pistons and seals, then clean each bore and the piston surfaces with brake fluid or a brake-safe cleaner. Pitting or scoring in a bore usually means the caliper body should be replaced rather than rebuilt, because new seals will not seal a damaged surface. Inspect the bleeder threads and the banjo fitting ports as well.
Some rear calipers have a mechanical parking function, so check the piston mechanism before pulling the piston. Keep track of which seal came from which bore, since the O-ring sizes differ. Lubricate the seals with fresh brake fluid of the type your system uses, and avoid petroleum-based grease, which can swell rubber seals.
- Replace pad abutment clips that show wear or corrosion
- Use new banjo crush washers at every banjo connection
- Bleed the system after reassembly
- Check for leaks after the first brake applications
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801179 |
| UPC | 90127959480 |
| Caliper type | 6P |
| O-ring inside diameter | 1.1875, 1.125 and 1.000 inch |
| O-ring material | EPDM rubber |
| O-ring rim shape | Square |
| Seal type | O-ring |
| Emission code | 6 |
| Pad abutments included | Yes |
| Pressure seals included | Yes |
| Weather seals included | Yes |
| Bleeder screw dust cap included | Yes |
| Bleeder screw included | No |
| Package type | Kit |
| Country of origin | USA |
Vehicle fitment
It is identified by the 6P caliper type and the rear position. Confirm that your caliper matches both before choosing it.
Only the 6P caliper type is named, so calipers of other types are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a rebuild kit, so the caliper has to be fully taken apart and cleaned before the new seals and clips go in. Match each O-ring to the piston bore it serves, because the three diameters differ. The bleeder screw is not included, so reuse a sound screw from the existing caliper. Brake work is safety-critical, so have a qualified technician handle the rebuild if you lack experience with hydraulic brakes.
What’s included
The kit contains pressure seals, weather seals, stainless steel pad abutment clips, new banjo crush washers and a bleeder dust cap, enough to service one 6P rear caliper.
Not included: The bleeder screw. Brake pads and the caliper body are not part of this kit.











