Overview
It is a rear brake caliper and bracket set in a red powder-coated finish, made for the 2009–2010 Dodge Ram 3500 and the 2011–2018 Ram 3500.
Power Stop designs its Performance calipers for enthusiasts who want a direct replacement that also looks good behind stock or custom wheels. The caliper and bracket are remanufactured at the company’s Chicago, IL facility, and they bolt in place of the stock rear calipers.
Key features
- Rear position, direct fit for the listed Ram 3500 trucks
- Caliper and bracket remanufactured in Chicago, IL
- High-temperature red powder-coat finish on caliper and bracket
- New premium boots and seals
- High-temperature silicone lubricant on the caliper pins for long pin life
- Premium abutment clips included where applicable
Ram 3500 rear brake service
Ram 3500 trucks are often used for towing and hauling, so the rear brakes handle heavy loads on every stop. Rear calipers should slide smoothly on their pins and return fully when the pedal is released. A caliper that binds can heat the pad and rotor, so pads should be checked for even wear whenever the calipers are serviced.
Replacing the caliper and bracket is often done together with new pads and rotors. Keep the brake fluid fresh once the lines have been opened, and bleed the system to remove air. Confirm the parking brake works after installation, since rear calipers on some setups interact with the parking brake mechanism.
- Check pads for even wear across both sides
- Inspect the bracket for cracks or bent tabs
- Test the parking brake after installation
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTS5210 |
| Product type | Rear brake caliper with bracket |
| Position | Rear |
| Fit type | Direct fit, bolts in place of the stock caliper |
| Finish | High-temperature red powder coat |
| Condition | Remanufactured, with new boots and seals |
| Pin lubricant | High-temperature silicone |
| Abutment clips | Premium clips, included where applicable |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 3500 in Laramie, SLT, ST and SXT, and the 2011–2018 Ram 3500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman.
Ram 3500 trucks built outside 2009–2018, and Ram 2500 or Ram 1500 models, are outside this part’s fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
These calipers replace the stock rear calipers directly. Disturbing a brake line means the system has to be bled with fresh fluid afterwards.
What’s included
A powder-coated rear caliper and its bracket, finished with new boots and seals, silicone lubricant on the caliper pins, and abutment clips where applicable.









