Leaf Spring Bushings & Pads
Showing 133–142 of 142 resultsSorted by popularity
-
Leaf Spring Bushings & Pads
Energy Suspension Leaf Spring Bushing Set (Red) – 2.2107R
- Energy Suspension 2.2107R red polyurethane leaf spring bushing set
- Designed for leaf springs with stock shackles
- Non-greaseable polyurethane construction, UPC 703639260080
- Marked universal fit; no vehicle fitment listed
SKU: ENE2.2107R -
Leaf Spring Bushings & Pads
Energy Suspension Leaf Spring Bushing Set (Black) – 2.2107G
- Energy Suspension 2.2107G black polyurethane leaf spring bushing set
- Built for leaf springs with stock shackles
- Non-greaseable polyurethane bushings, UPC 703639260066
- Marked universal fit; fitment not listed by vehicle
SKU: ENE2.2107G -
-
-
-
-
Leaf Spring Bushings & Pads
Energy Suspension Leaf Spring Bushing Set (Black) – 2.2115G
- Energy Suspension 2.2115G black polyurethane leaf spring bushing set
- Non-greaseable design, offered over worn or stock rubber bushings
- Universal fit; built for the front with aftermarket shackles
- No vehicle years, makes or models given
SKU: ENE2.2115G -
Leaf Spring Bushings & Pads
Rubicon Express Bushing Kit Greaseable For 1.5 Inch Id Main Eye (Black) – RE2790
Leaf Spring Bushings & PadsRubicon Express Bushing Kit Greaseable For 1.5 Inch Id Main Eye (Black) – RE2790
- Rubicon Express RE2790 greaseable polyurethane main eye bushing kit
- Fits a 1.5-inch inside diameter main eye
- Black, greaseable and polyurethane
- Replaces worn factory rubber bushings
SKU: R/ERE2790 -
Leaf Spring Bushings & Pads
Rubicon Express Leaf Spring Bushing Kit 1.5 Inch Id Main Eye/ 1.5 Inch Id Shackle/ 4 Springs (Black) – RE1492
Leaf Spring Bushings & PadsRubicon Express Leaf Spring Bushing Kit 1.5 Inch Id Main Eye/ 1.5 Inch Id Shackle/ 4 Springs (Black) – RE1492
- Black polyurethane leaf spring bushing kit with sleeves
- Covers four leaf springs
- For springs with 1.5-inch inside diameter main eye and shackle bushings
- Non-greaseable service; part number RE1492
SKU: R/ERE1492 -
What these parts do
A leaf spring pack is attached to the frame and the axle at several points. Bushings press into the spring eyes and hangers, letting the spring pivot while isolating noise, and spring pads or isolators sit between the pack and axle perch. Wear shows up as clunking over bumps, wandering under braking, uneven alignment and in extreme cases the axle shifting under load.
Rubber, polyurethane and other materials
- Rubber is quiet and comfortable, which is why it is the factory choice. It does wear and can crack with age and oil exposure.
- Polyurethane is firmer and generally holds up well, with less deflection. It can transmit more vibration and may squeak without correct lubrication.
- Greasable or bronze-style designs are used for heavy trail use, where flex is more important than ride comfort.
Hardness is often rated by durometer, with higher numbers being firmer. A firmer bushing reduces body motion, but a softer one gives better ride quality.
Choosing the right kit
Match the part to its position. Front eye bushings, rear eye bushings and shackle bushings are often different sizes, and kits may include inner sleeves. Check the inner and outer diameter, the length and whether the kit covers one spring or all four corners. For lifted vehicles, remember that shackles and hangers might be different from stock, so confirm the new parts fit the eye size.
Installation notes
Replacing bushings generally means unloading the spring, removing the bolts, and pressing out the old bushing. A press, torch-free tools and a bushing lubricant make it easier. Support the vehicle on stands, never on a jack alone. Final tightening of the shackle and eye bolts should be done with the vehicle's weight on the suspension, to avoid binding and premature wear, and to the torque specifications listed by the manufacturer. If you are unsure, a shop can handle the job. Replace bushings in pairs on the same spring, since a fresh bushing next to a worn one can leave the spring uneven.
Confirm fitment
Leaf spring components differ by axle, model year and whether a lift is installed. Confirm fitment for your exact year, make and model and check the manufacturer's specifications for size and material before choosing.
Inspection and common pairings
Leaf springs wear as a system, so inspect the whole pack while the vehicle is supported. Look for cracked or shifted leaves, loose center bolts, missing rebound clips and worn shackle hardware. Spring bushings are often replaced together with shackle bushings, U-bolts and any worn bolts, since reusing old U-bolts can let the axle loosen on its perch. If you hear squeaking, a lubricant made for the chosen bushing material may help, but a squeak from a rubber bushing that is dry and cracked usually means it is time to replace it. If the vehicle sags on one side, consider the spring condition as well as the bushings, since a tired spring pack changes ride height.
Torque values for spring hardware vary by size and grade of bolt, so use the figures from the vehicle service manual or the part maker, and use a torque wrench rather than an impact gun when snugging the final bolts.
Popular Leaf Spring Bushings & Pads brands
- Energy Suspension (53)
- ARB 4x4 Accessories (26)
- Crown Automotive (13)
- Pro Comp Suspension (8)
- Skyjacker (8)
- Daystar (8)
- Omix-Ada (7)
- Rubicon Express (6)
- Prothane (4)
- Fabtech (3)
- Rancho (3)
- Prothane Motion Control (1)
Leaf Spring Bushings & Pads FAQ
How do I know if my leaf spring bushings are worn?
Common signs are clunking over bumps, a loose or wandering feel, visible cracks or splits in the rubber, and an axle that shifts under braking or acceleration. Inspect them with the weight off the spring and use a pry bar to check for play.
Are polyurethane bushings better than rubber?
They are firmer and often last longer, but ride quality and noise can suffer. Rubber is quieter and absorbs vibration better. The best choice depends on whether you prioritize comfort, handling or trail articulation.
Do bushings need grease?
Many polyurethane bushings need lubricant at installation to avoid squeaks, and some designs have a grease fitting for regular service. Follow the manufacturer's instructions, because the wrong lubricant can damage rubber parts.







