Overview
The AMP-Research 75107-01A is a black PowerStep electric running board set with an integrated LED light system. When the door closes the board stows itself, and the maker credits this with better ground clearance and aerodynamics.
They are a direct fit for cab configurations.
Key features
- Electric deployment tied to the door opening and closing
- Integrated LED lights come standard.
- Die-cast, high-strength aluminum-alloy linkage
- Stainless pivot pins on self-lubricating bushings, with zero maintenance
- Textured powder coat with a grip-focused finish
- 600 lb load capacity on each side
- Optional stainless-steel trim available
Before you buy
Power running boards add convenience, but they also add moving parts that sit low on the truck. Before you buy, consider how often you will use the deploying step, whether you carry passengers, and how much clearance you need on uneven ground. Electric steps work well for those who climb in and out daily, while a fixed step may suit those who rarely use one.
Good upkeep keeps an electric board working. Wipe off road salt and mud after wet trips, since grit can slow the linkage. Inspect the pivots and bushings for play at regular intervals, and listen for grinding or hesitation when the door opens. A slow or uneven deployment is often the first sign that the mechanism needs cleaning or adjustment.
Consider the wiring and mounting too. Electric boards tie into the truck’s power and door signals, so a loose connection can cause intermittent operation. Make sure the harness is secured away from heat, moving parts and the exhaust, and check the connection after the first few weeks of use.
- Rinse salt and grit from the linkage monthly
- Check connector seating after the first weeks
- Watch for uneven or slow deployment
Specifications
| Brand | AMP-Research |
|---|---|
| Part number | 75107-01A |
| UPC | 815410010187 |
| Color | Black |
| Load capacity | 600 lb each side |
| Lighting | Integrated LED, standard |
| Warranty | 5-year/60,000-mile |
| Finish | Military-spec anodized with Teflon, textured powder coat |
| Fitment type | Direct Fit, cab |
Vehicle fitment
These boards are a Direct Fit for cab configuration. Confirm fit for your truck’s year, make, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The motor-driven deployment connects electrically to the truck. Follow the written installation steps before starting, and have the wiring checked by someone experienced with vehicle electrical work.
What’s included
The running board set with its integrated LED lights. Check the mounting hardware against your installation before starting.
Not included: the optional stainless-steel trim.












