Fog Lights
Showing 37–48 of 62 resultsSorted by popularity
-
Fog Lights
Baja Designs Sport S1 Wide Cornering Fog Light Kit (Amber) – 447683
- Baja Designs Sport S1 wide cornering fog light kit, amber, part number 447683
- Pair of S1 LED auxiliary lights at 5000K
- Plug and play adapters, no cutting or drilling
- Fits the 2021-2026 Ford Bronco Sport in selected trims
SKU: BAJ447683 -
-
-
-
-
Fog Lights
Rigid Industries Dual Fog Light Kit – 41616
- Rigid Industries 41616 dual fog light kit for the 2017-Current Ford Super Duty
- Mounts 4 Rigid D-Series (Dually or D2) LED lights in both OEM fog lamp locations
- Stainless steel adaptor plates with black powder-coat
- Limited lifetime warranty from Rigid Industries
SKU: RIG41616 -
Fog Lights
Rigid Industries Single Fog Light Kit – 41614
- Rigid Industries 41614 fog light kit for the 2017-Current Ford Super Duty
- Mounts 2 Rigid D-Series (Dually or D2) LED lights in both fog light locations
- Stainless steel adaptor plates with black powder-coat finish
- Backed by Rigid Industries’ limited lifetime warranty
SKU: RIG41614 -
Fog Lights
Rigid Industries Raptor Triple Fog Mounting Light Kit – 41611
- Mount kit for 6 Rigid D-Series LED lights, part number 41611
- Stainless steel adaptor plates with black powder-coated finish
- Made for the 2017-current Ford Raptor fog light locations
- D-Series lights are sold separately
SKU: RIG41611 -
Fog Lights
Rigid Industries Raptor Triple Fog Light Kit – 41610
- Mounts 6 D-Series LED lights in Ford F-150 Raptor OEM fog lamp locations
- Rigid lists fit for 2017–2018 Ford F-150 (Raptor)
- Stainless steel adaptor plates, black powder-coated, no drilling
- Everything needed to install the lights in both locations
- Part number 41610
SKU: RIG41610 -
Fog Lights
Rigid Industries D-Series LED Fog Light Kit – 40338
- D-Series LED fog light kit for four D-Series lights, two per fog opening
- Fits 2011–2014 Chevrolet Silverado 2500 HD and 3500 HD
- Laser-cut 304 stainless steel with black powder-coat
- Installs with basic hand tools, no drilling or cutting
SKU: RIG40338
What fog lights are for
Fog lights sit low on the bumper and throw a wide, flat beam with a sharp upper cutoff. Mounted low, they light the road edge and the ground just ahead without reflecting off fog, snow, rain or dust back at the driver. On the trail they fill in the dark area beside and in front of the vehicle that headlights and a roof bar leave unlit.
Types in this category
- **Pocket kits.** Compact pod lights from makers like Baja Designs that fit into a factory fog light pocket on specific vehicles.
- **Round LED fogs.** Four-inch units that replace or supplement the factory lamp or fit into bumper mounts.
- **Halo and projector lamps.** Aftermarket styled lights that add a ring of light or a projector lens for a customized look.
- **Amber, yellow and white lenses.** Yellow and amber are often preferred in dust or snow because they reduce glare, while white gives a cleaner, more natural color.
- **Bumper lights.** Universal lamps for custom bumpers.
Key specs to compare
- **Beam pattern.** Look for a true fog pattern, listed as fog, wide or SAE fog, rather than a spot beam, which can glare in poor visibility.
- **Housing and lens.** Aluminum housings and polycarbonate lenses are common. Some products list impact and water protection ratings such as IP and IK, and military test standards. Use those ratings as comparison points rather than guarantees.
- **Power use.** Watts and lumens vary. LEDs draw less current than halogen, which eases the load on the wiring.
- **Color temperature.** Around 5000K is a neutral white; warmer colors reduce glare.
- **Fit.** Direct-fit units list a vehicle application, while universal lights need brackets and wiring.
Installation and legal notes
Vehicle-specific fogs often plug into the factory harness, but some need adapters or a relay. Universal lamps need a fused, relayed circuit and a switch. Aim fog lights low and slightly downward so they do not blind other drivers, and check the aim after installation.
Lighting rules, including color and use on public roads, vary by state, so check local regulations. Some listings, such as a 2007-2018 Wrangler JK halo kit, name the vehicle directly, so confirm fitment for your exact year, make and model before you buy. Disassembly of a factory fog lamp may be needed for halo kits, so follow the instructions.
To confirm fitment, check the factory fog light opening size, the plug type, and whether the vehicle uses a bumper pocket or a bracket-mounted lamp. For universal lights, measure the mounting space and the stud or bracket pattern. Choose lenses with a clear fog pattern and check that the housing sits where it will not be hit by rocks.
Pair the lights with a switch, a relay, a wiring harness and weatherproof connectors. Common mistakes include aiming lights too high, running lights without a fuse, and mounting them where snow and mud collect. Maintenance includes rinsing off dirt, checking the seals for moisture, tightening the mounts, and checking the aim after any suspension change. If a lamp fogs up inside after washing, the seal or vent may be damaged and the unit should be inspected.
Popular Fog Lights brands
- Baja Designs (19)
- Rigid Industries (8)
- Oracle Lighting (6)
- Spyder Auto Group (6)
- JW Speaker (6)
- Piaa Lighting (3)
- ARB 4x4 Accessories (3)
- Hella (3)
- KC HiLites (2)
- Omix-Ada (1)
- Rampage (1)
- Smittybilt (1)
Fog Lights FAQ
Are yellow fog lights better than white?
Yellow and amber lenses can reduce glare from rain, snow and dust for some drivers, while white offers more natural color rendering. Neither is universally better. Check local rules about lamp color and use what suits your conditions.
Can I use a fog light as a driving light?
They are different. Fog lights give a wide, low beam, while driving lights are focused for distance. Using a fog lamp as a distance light will not reach far, and a spot beam in fog can cause glare.
Do fog lights need a relay?
Many direct-fit kits plug into the factory circuit and need none, but universal lamps and higher-draw LED sets generally should use a fused relay and switch. Follow the manufacturer's wiring instructions for the specific product.
How should fog lights be aimed?
Aim them low and slightly downward, with the top of the beam below the level of the headlights, so the light covers the road edge and ground without glaring at oncoming drivers. Recheck aim after installing or lifting.











