Cargo Area Security Box covers the locking steel storage that turns an open Jeep or pickup cargo area into a trunk: Tuffy deck enclosures, tailgate lockboxes and security drawers for the Wrangler YJ, TJ, JK and JL, in-floor storage lids for Ram trucks and under-seat drawers for the Colorado and Canyon, along with Bestop and Smittybilt lock boxes. Most are welded 16 gauge steel with a 10 tumbler lock and powder coat finish.Check the body style and mounting method, then compare the products below.
Cargo Area Security Box
Showing 1–12 of 32 resultsSorted by popularity
-
Cargo Area Security Box
Tuffy Locking Cub – 143-01
- Tuffy Locking Cubby Cover, part number 143-01, replaces the factory cover over the hidden floor compartment
- Fits 2007 to 2018 Jeep Wrangler JK, 2 and 4-door models
- 16 gauge and 1/8 inch thick welded steel with Pry-Guard locking system
- Mounts to the factory holes with no drilling required
- Limited lifetime warranty; 2016 models require subwoofer removal
SKU: TFY143-01 -
Cargo Area Security Box
Tuffy Tailgate Lockbox – 349-01
- Fits 2018–2026 Jeep Wrangler (JL) 2-door and 4-door models
- Mounts inside the JL tailgate with two removable shelves
- Door folds down into a work table; welded 16-gauge steel with powder coat
- Pry-Guard locking system with 10-tumbler double bitted lock and weather seals
SKU: TFY349-01 -
Cargo Area Security Box
Tuffy Security Drawer – 131-01
- Fits 2004–2006 Jeep Wrangler Unlimited (LJ) and 1997–2006 Jeep Wrangler (TJ) trims
- Heavy duty 16 gauge steel drawer mounted behind the rear seat
- Heavy duty stainless steel roller bearing slides; lockable
- Four available mounting heights with a maximum of 4 inch clearance underneath
SKU: TFY131-01 -
Cargo Area Security Box
Tuffy Security Deck Enclosure – 345-01
- Fits 2018–2026 Jeep Wrangler JL, 2-door and Unlimited 4-door, many trims
- Tuffy security deck enclosure, part number 345-01 (TFY345-01)
- Welded 16 gauge steel with patented lid lock and lid that removes without tools
- Mounts to existing OEM floor mounting points with no drilling
- Tuffy anchor rails available separately
SKU: TFY345-01 -
Cargo Area Security Box
Tuffy Security Deck Enclosure – 240-01
- Fits 1987–1995 Jeep Wrangler (YJ), 1997–2006 Wrangler (TJ) and 2004–2006 Wrangler Unlimited (LJ)
- Mounts without drilling in TJ and LJ; YJ mounts to factory holes with optional drilling
- Welded steel lid with weight-bearing top tray and two large trays on each side
- Lid and front panel remove without tools; optional rubber mat part 864 is a separate item
SKU: TFY240-01 -
Cargo Area Security Box
Tuffy Deluxe Security Deck Enclosure – 326-01
- Fits 2011–2018 Jeep Wrangler (JK) 2-door and 4-door models, with many trims listed
- Lockable deck enclosure of welded 16 gauge steel with a patented security system
- Lid, front panel and side panels remove without tools
- Installs to the vehicle floor with standard hand tools; works with or without an OEM hardtop
SKU: TFY326-01 -
-
Cargo Area Security Box
Tuffy Security Drawer – 325-01
- Fits 2015–2018 Chevrolet Colorado (LT, WT, Z71) and GMC Canyon (Base, Denali, SLE, SLT)
- Tuffy security drawer, part number 325-01, mounts under the rear split bench seat
- Over 1200 cubic inches of lockable storage per Tuffy’s feature list
- 16 gauge steel with Pry-Guard lock and 10 tumbler double bitted key
- Drawer access from driver and passenger rear doors, no drilling
SKU: TFY325-01 -
Cargo Area Security Box
Tuffy Security Console Insert (Black) – 314-01
- Fits 2005–2015 Toyota Tacoma with a fixed center console (Base, Pre Runner, TRD Pro, X-Runner trims)
- Tuffy security console insert, part number 314-01, black
- Welded 16 gauge steel with 1/8 inch thick Pry-Guard components
- 10 tumbler double bitted Pry-Guard lock with built-in weather seals
- Includes external accessory tray and lid support feature
- Installs without drilling
SKU: TFY314-01 -
Cargo Area Security Box
Tuffy RAM In-floor Storage Security Lid – 311-01
- Fits 2009–2010 Dodge Ram and 2011–2016 Ram 1500, 2500 and 3500 trucks
- Replaces the factory plastic in-floor cover with a 16 gauge steel lid
- 10-tumbler double bitted lock within the Pry-Guard locking system
- Four screws mount the plate to the floor with no drilling; all fastening hardware included
SKU: TFY311-01 -
Cargo Area Security Box
Tuffy Security Tailgate Enclosure – 296-01
- Fits 1997–2006 Jeep Wrangler (TJ) per the manufacturer fitment list, with several trims listed
- Two-piece 16 gauge steel lockable enclosure with a weight-bearing lid
- Integrated mounting hardware; no drilling required
- Keeps the fold n tumble rear seat in use and function
SKU: TFY296-01
Why a Jeep needs a lockbox
A Wrangler with a soft top or no top has no trunk. Anything in the back is a knife cut away, and even hardtop Jeeps are easy to enter through the flip glass. A security box bolted to the floor gives you one place that takes real time and tools to open, which is enough to send a casual thief to the next vehicle. Pickup owners face a different version of the same problem with open consoles and under-seat spaces, which is why this category also includes in-floor lids and under-seat drawers for trucks.
Types of security box
- Deck enclosures: a steel box that fills the cargo floor behind the rear seat of a Wrangler, with a load-bearing lid you can stack gear on and trays molded into the top. The lid and front panel usually remove without tools so the rear seat can still fold or tumble.
- Tailgate enclosures and lockboxes: a two-piece box that mounts against the inside of the tailgate, or a box that fits inside the JL tailgate itself with shelves and a fold-down work surface.
- Security drawers: a lockable drawer on roller bearing slides that mounts behind the rear seat of a TJ or LJ, or under the rear bench of a Colorado and Canyon, keeping the floor space above it usable.
- In-floor storage lids: a steel lid that replaces the plastic cover on a Ram's factory in-floor bins so the bins lock.
- Lock box sleeves: brackets that mount a portable lock box to the vehicle so it cannot be carried off.
What makes one more secure than another
Look at the steel gauge, the lock and the way the lid overlaps the body. Tuffy builds its boxes from welded 16 gauge steel with 1/8 inch thick plate around the latch, which it calls Pry-Guard, and fits a 10 tumbler double bitted lock with a weather seal. A recessed lock and a lid that overlaps the box walls leave nothing for a pry bar to grab. Hinges should be continuous welded steel on the inside. Also check how the box attaches: a box bolted through the floor with backing plates is far harder to remove than one sitting on factory tie-downs. None of this makes a vault, but it means minutes of noisy work with tools rather than a quick reach.
Fit and mounting
Enclosures follow the floor shape of one generation and body: a JK two-door box is a different part from the four-door, and the JL has its own, including versions for the factory subwoofer. Most Tuffy JK, JL, TJ and LJ enclosures mount to existing floor points with no drilling; YJ installs may use factory holes with optional drilling, and some four-door tailgate enclosures need minor drilling. Confirm whether the box works with your rear seat in place and with a subwoofer if you have one. In-floor lids for Ram trucks are year specific and mount with four screws to the floor. Drawers list available mounting heights and the clearance left underneath.
Installation and use
Lay the box in position and check that the lid clears the seat back and the tailgate before bolting anything. Where drilling is needed, look under the floor for fuel lines, wiring and the exhaust before drilling, and seal the holes against water. Use every mounting point; a box held by two bolts can be twisted free. Store the spare key somewhere other than inside the box, lubricate the lock once a year with a dry lock lubricant, and cover the lid with the optional diamond plate vinyl if you load rough gear on it. Keep valuables out of sight even with a lockbox, since a thief who does not know anything is there will not try.
Popular Cargo Area Security Box brands
Cargo Area Security Box FAQ
Do Tuffy deck enclosures require drilling?
Most do not. The JK, JL, TJ and LJ enclosures mount to factory floor points and tie-down locations with no drilling. The YJ version uses factory holes with optional drilling, and some four-door tailgate enclosures need minor drilling. Each listing states the method.
Can I still fold the rear seat with a cargo lockbox installed?
Usually yes. Tuffy enclosures are shaped to let the rear seat fold or tumble, and many lids and front panels remove without tools. Tailgate enclosures keep the fold-and-tumble seat working as well. Check the fit notes for your body style and seat type.
How secure is a 16 gauge steel lockbox?
It resists prying and casual attack well because of the overlapping lid, recessed 10 tumbler lock and thicker plate around the latch. Given time and power tools anything can be opened, so treat it as a strong deterrent for an open vehicle rather than a safe.
Will a JK security box fit a JL?
No. The floor shape, tie-down points and tailgate differ, and the JL has subwoofer and non-subwoofer versions. Boxes are also split between two-door and four-door models. Match the exact generation and body style listed on each product.











