Overview
The Tuffy Locking Cubby Cover, part number 143-01, is a heavy duty replacement for the factory cover over the hidden floor compartment. It fits 2007 to 2018 Jeep Wrangler (JK) models in two and four door versions.
It is made from 16 gauge and 1/8 inch thick welded steel, which gives the compartment a lockable space for valuable tools and gear. The lid also keeps the jack secured when the cover is locked, and it provides a sturdier, more durable deck surface for items placed on top. The cover mounts to the original factory holes without drilling.
Key features
- Pry-Guard locking system with 1/8 inch steel components
- 10-tumbler, double bitted security lock with built-in weather seals
- Continuous welded steel hinge
- 1/8 inch thick welded steel mounting plate with all fastening hardware included
- Jack is secured when the cover is locked
- Works in conjunction with JK Security Drawer part number 140
Keeping the cubby cover secure
A hidden floor compartment is only as secure as its lid, so check the hinge and lock alignment after installation. Close the cover with the jack and tools in place and confirm the latch holds firmly. Dirt and road grime can work into the Pry-Guard mechanism over time, so a light cleaning and an occasional lock check help it operate smoothly.
Because the cover is a steel deck, it can carry items placed on top, but heavy loads should be spread out rather than concentrated in one spot. Inspect the mounting hardware periodically, especially after rough trail use, and retighten any fasteners that have worked loose. A cover that rattles or sits unevenly may need its fasteners rechecked before further driving.
- Test the lock with the cover open and closed
- Check the hinge for play after rough trail use
- Retighten fasteners that have worked loose
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 143-01 |
| UPC | 70000411333 |
| Material | 16 gauge and 1/8 inch thick welded steel |
| Mounting plate | 1/8 inch thick welded steel |
| Mounting brackets | 1/8 inch steel with grade 8 fastening hardware |
| Lock | Pry-Guard, 10-tumbler double bitted security lock |
| Hinge | Continuous welded steel |
| Finish | Durable black powder coat |
| Warranty | Limited lifetime warranty |
| Model year note | 2016 models: subwoofer must be removed for fitment |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler (JK) with Unlimited versions of each trim, including Unlimited X and X. Trims covered are 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S.
This list does not cover the Wrangler JL, the Gladiator, or earlier TJ and LJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cover mounts to the factory holes without drilling. On 2016 models the subwoofer must be removed for fitment, so plan for that step before fitting the cover.
What’s included
All fastening hardware and the welded mounting plate are included with the cover.
Not included: The JK Security Drawer (part number 140), which is referenced as a companion product and is not included.




















