Center Console gathers the storage that sits between the front seats: welded 16 gauge steel locking consoles and console inserts from Tuffy for Jeeps, Toyota Tacoma and Tundra, Ford Super Duty and Ram, padded vinyl consoles with built-in coolers from Rugged Ridge and Vertically Driven Products for the CJ, YJ and XJ, molded plastic consoles from Rampage and Smittybilt for the TJ, and marine vinyl console covers from PRP Seats.Decide between a full console and an insert, then compare the products below.
Center Console
Showing 1–12 of 53 resultsSorted by popularity
-
Center Console
Tuffy JL Deck Enclosure for Alpine Subwoofer (Black) – 351-01
- Fits the 2018 to 2026 Jeep Wrangler JL, per the manufacturer fitment list
- Tuffy part number TFY351-01 in black
- Welded 16-gauge steel with a durable textured powder coat finish
- Lid closes with Tuffy’s patented security system that works with the Jeep’s locking tailgate
- Works with the OEM compartment cover and the Alpine subwoofer option
SKU: TFY351-01 -
Center Console
Tuffy Deluxe Stereo Security Console (Charcoal) – 013-03
- Tuffy 013-03 charcoal deluxe stereo security console
- Patented pushbutton latch; lid latches closed without locking
- Pre-cut DIN stereo compartment plus lockable rear storage
- Radio holder included; stereo not included
- Labeled Universal Fit; no vehicle years or models named
SKU: TFY013-03 -
-
Center Console
Rugged Ridge Ultimate Locking Console (Black Denim) – 13102.15
- Rugged Ridge 13102.15 Black Denim ultimate locking console
- Fits 1976–1983 CJ5, 1976–1986 CJ7, 1981–1985 Scrambler and 1987–1995 Wrangler (YJ)
- Removable 6 can cooler and fully lined locking storage
- Mounting hardware included
SKU: RUG13102.15 -
Center Console
PRP Center Console Cover (Black/Red) – B104-05
- PRP B104-05 black and red center console cover for 2011–2018 Jeep Wrangler JK
- Fits 2-door and Unlimited 4-door models in the listed trims
- Installs over the stock center console with OEM fit and finish
- Made from marine-grade vinyl
SKU: PRPB104-05 -
Center Console
Vertically Driven Products Ultimate Locking Console (Charcoal Gray) – 41511
- Vertically Driven Products 41511 charcoal gray locking console for 1976–1995 Jeep CJ, XJ and YJ models
- Recessed, removable cooler holds 6 cans
- Two sets of 3 1/2 inch deep cup holders
- XL padded armrest with 5 x 7 non-skid catch all
- Leveling bracket included
SKU: VDP41511 -
Center Console
Arm Rest Cover Caddy
- Soft neoprene arm rest cover that fits over the factory console lid
- Copy names 2007 to 2014 Jeep Wrangler JK, Rubicon and Unlimited models
- Ballistic nylon side pockets held in place with hook and loop fasteners
- Allows full function of console storage locks and compartment access
SKU: VDP35005 -
Center Console
Vertically Driven Products Molded Console (Charcoal Gray) – 32421
- Vertically Driven Products 32421 charcoal gray molded console for 1997–2002 Jeep Wrangler (TJ) SE and Sport models
- Flip-up locking lid with storage for CDs, tapes or other items
- Cup holders for rear passengers
- Contoured roto-molded plastic; installs without drilling
SKU: VDP32421 -
Center Console
Tuffy Security Console Insert (Black) – 324-01
- Tuffy 324-01 black security console insert for the Toyota Tacoma with a fixed center console
- 16 gauge welded steel body with Pry-Guard locking system
- 10 tumbler double bitted lock with built-in weather seals and finger pull
- External integrated accessory tray and lid support
- Installs without drilling; patent pending
SKU: TFY324-01 -
Center Console
Tuffy Security Console Insert (Black) – 323-01
- Fits the 2014–2018 Toyota Tundra per the manufacturer fitment list (1794 Edition, Limited, Platinum, SR, SR5, TRD Pro)
- Tuffy 323-01 black security console insert in 16 gauge welded steel
- Pry-Guard locking system with 10 tumbler double bitted lock
- Lid support holds the lid open; external integrated accessory tray
- Installs without drilling; radio holder not included
SKU: TFY323-01 -
Center Console
Tuffy Security Console Insert (Black) – 322-01
- Fits 2011–2016 Ford F-250 and F-350 Super Duty with a flow-through center console
- Welded 16 gauge steel body with 1/8 inch thick Pry-Guard locking components
- 10 tumbler double bitted lock with built-in weather seals
- Keeps the factory armrest, lid and accessory rubber insert in full use
- OEM 12v outlet cord access, and installs without drilling
SKU: TFY322-01 -
Center Console
Tuffy Security Console Insert (Black) – 321-01
- Fits 2010 and 2011–2018 Dodge Ram 1500, 2500 and 3500 per fitment list
- 16 gauge welded steel insert with Pry-Guard locking system
- Keeps full use of the armrest and lid, with a lid support feature
- External integrated accessory tray included
- Drilling required; part number 321-01
SKU: TFY321-01
Full console or insert
There are two approaches here. A full console replaces whatever is between the seats, which on a CJ, YJ or early XJ is often nothing, and gives you an armrest, cup holders and a storage well. A console insert drops into the factory console of a late model truck such as a Tacoma, Tundra, F-250 or Ram, turning the existing compartment into a locked steel box while keeping the factory lid and armrest. Inserts are the choice when the stock console is good and you want security; full consoles are for Jeeps that never had one or whose plastic original has cracked.
Security consoles explained
Tuffy's steel consoles and inserts are built from welded 16 gauge steel with thicker plate around the lock, a 10 tumbler double bitted lock with a weather seal, and a lid that resists prying because the latch is recessed. That is a real deterrent against a smash-and-grab in an open Jeep, which is the use they are designed for. The steel is not a safe, and anything bolted to the floor can be removed given time, but the point is to make the console slower to open than the thief is patient. Features worth comparing are external accessory trays, lid supports that hold the lid open, pass-throughs that keep the factory 12 volt outlet working, and whether the insert preserves the flow-through design on consoles that have one.
Vinyl and plastic consoles for older Jeeps
The padded consoles from Rugged Ridge and Vertically Driven Products for the 1976 to 1995 CJ, Scrambler, YJ and XJ wrap a plastic coated wood or molded frame in vinyl, with a dense foam armrest, two cup holders and a recessed removable cooler that holds six cans. Locking lids are common, although vinyl and wood do not resist a determined pry the way steel does. They bolt to the floor tunnel with included hardware and a leveling bracket. Rampage and Smittybilt roto-molded plastic consoles for the TJ add a flip-up locking lid and rear cup holders and install without drilling. Measure the space between the seats and the shifter positions first, since a 27 inch long console with a tall armrest can interfere with a transfer case lever on some setups.
Fitment checks
- Match the exact body code and years. A Tacoma insert for a fixed center console is a different part from the Tundra or Super Duty insert, and the 2005 to 2015 Tacoma differs from later ones.
- Consoles for the JL with a subwoofer differ from those without; the Tuffy enclosure for the Alpine subwoofer is one example.
- Mounting kits are sold separately for some older vehicles, such as the Tuffy brackets for a 1973 to 1978 Land Cruiser.
- Check whether a radio or stereo opening is included if you need one; the Tuffy stereo console has a DIN cutout but no radio.
- Console covers such as the PRP marine vinyl piece fit over a stock JK console and do not add storage.
Installation
Steel consoles bolt through the floor or into existing seat and console mounting points. Where drilling is required, check under the floor for fuel lines, brake lines and wiring before the bit goes through, and seal the holes against water. Use the backing plates provided so the bolts cannot be pulled through the sheet metal. Many inserts install with hand tools and no drilling. After installation, test the lock with the key several times and keep the spare key somewhere other than inside the console.
Popular Center Console brands
- Tuffy (25)
- Rugged Ridge (11)
- Rampage (8)
- Smittybilt (6)
- Vertically Driven Products (3)
- Bestop (1)
- PRP Seats (1)
Center Console FAQ
Will a security console insert keep my factory armrest and lid?
Yes. Inserts from Tuffy drop into the stock console of trucks like the Tacoma, Tundra, F-250 and Ram and add a locking steel lid under or in place of the compartment, while the factory armrest, lid and usually the 12 volt outlet stay in use.
Are Jeep locking consoles really secure?
Steel consoles with a 10 tumbler lock and recessed latch resist quick pry attacks, which is what matters in an open Jeep. Padded vinyl consoles with a locking lid deter casual grabs but not a determined thief. Nothing bolted to the floor is a safe, so keep valuables out of sight.
Do these consoles fit a Jeep with a manual transmission?
Most do, but console length and armrest height can interfere with a tall transfer case or shifter lever. Measure the space between the seats and the shifter positions, and compare them with the dimensions in the listing before choosing.
Can I install a console without drilling?
Some can. Roto-molded TJ consoles and many Tuffy inserts use existing holes and hand tools. Full steel consoles and padded consoles for CJ and YJ usually bolt through the floor tunnel. Check the listing, and look under the floor for lines and wiring before drilling.











