Overview
The Tuffy 240-01 is a security deck enclosure and cargo lockbox for the Jeep Wrangler YJ, TJ and LJ. It creates a large, lockable storage area that is completely protected on all sides and works with the vehicle rear door and lock.
The lid hinges open and latches with an innovative system that Tuffy says is covered by patent rights. The lid and front panel come off without tools, so larger items can be transported, and all trays have external drain holes to prevent puddling moisture.
Key features
- Completely protected on all sides
- Weight-bearing tray on top of the welded lid
- Two large trays on each side above the wheel well
- External drain holes in all trays
- Lid and front panel remove without tools
- Works with an OEM hard or soft top
- Innovative latching system with patent rights reserved
Choosing a deck enclosure
A deck enclosure turns the rear of a Wrangler into a lockable cargo area that stays closed when the vehicle is parked. Before buying, think about how often you will load and unload, since a lid that comes off without tools is handy for bulky gear but needs a safe place to rest. Consider the weight of what you plan to carry and whether you will travel with the lid open at a campsite.
Enclosures sit on the floor and along the rear, so the condition of the factory mounting points matters. Look for rust, bent brackets or worn threads before installing. Keeping the enclosure level and tight reduces rattles on rough trails and helps the lid seal properly against the weather.
- Check the mounting points for rust before installing
- Plan storage so heavy items sit low and near the centerline
- Keep the drain holes clear of mud and debris
- Re-check panel fasteners after the first few trail runs
Specifications
| Brand | Tuffy |
|---|---|
| Part number | TFY240-01 |
| Type | Cargo lockbox |
| Construction | Structural welded steel lid |
| Trays | Weight-bearing tray on top; two large trays on each side above the wheel well |
| Drainage | External drain holes in all trays |
| Mounting | No drilling in TJ and LJ; YJ mounts to factory holes with optional drilling |
| Top compatibility | OEM hard or soft top |
| Optional accessory | Rubber mat part 864, not included |
Vehicle fitment
The manufacturer fitment list covers the 1987–1995 Jeep Wrangler (YJ), the 1997–2006 Wrangler (TJ) and the 2004–2006 Wrangler Unlimited (LJ), across the trims shown on the list.
The enclosure covers 1987–1995 Jeep Wrangler (YJ), 1997–2006 Wrangler (TJ) and 2004–2006 Wrangler Unlimited (LJ) models. JK Wranglers from 2007 onward and JL Wranglers from 2018 onward fall outside those years, so match your year, model and trim before ordering.
Installation notes
On TJ and LJ models the enclosure mounts without drilling. On YJ models it mounts to the factory holes, and optional drilling may be needed.
What’s included
The lockbox enclosure with its lid, front panel and trays.
Not included: Optional rubber mat part 864 is a separate part.











