Fenders & Flares
Showing 97–108 of 142 resultsSorted by popularity
-
Fender Flares
Bushwacker Max Pocket Style Fender Flares – 20946-02
- Bushwacker Max Pocket Style fender flare set, part number B/W20946-02
- Fits 2018–2020 Ford F-150 in the trims below
- Sold as a set of 4, front and rear, black pocket/rivet style
- Front tire coverage 2.75 inches, rear 2.25 inches
SKU: B/W20946-02 -
Fender Flares
Bushwacker Max Coverage Pocket Style Rear Fender Flares (Paintable) – 20100-02
- Bushwacker Max Coverage Pocket Style rear fender flares, part number B/W20100-02
- Fits 2015–2020 Ford F-150 in King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT
- Sold as a pair, paintable, UV-protected matte black finish
- Width/Coverage is 2.75 inches
SKU: B/W20100-02 -
Fender Flares
Bushwacker Max Coverage Pocket Style Fender Flare Set in White Diamond Tricoat (Paintable) – 40958-24
Fender FlaresBushwacker Max Coverage Pocket Style Fender Flare Set in White Diamond Tricoat (Paintable) – 40958-24
- Set of four front and rear fender flares
- 2-inch coverage in the pocket style
- Surface-mounted stainless steel bolts, no body-side drilling
- Made in the USA from Dura-Flex 2000
- Bushwacker lists them for 2014-2015 GMC Sierra 1500
SKU: B/W40958-24 -
Fender Flares
Bushwacker Max Coverage Pocket Style Fender Flare Set in Summit White (Paintable) – 40967-14
Fender FlaresBushwacker Max Coverage Pocket Style Fender Flare Set in Summit White (Paintable) – 40967-14
- Bushwacker Max Coverage Pocket Style flare set in Summit White, part number B/W40967-14
- Fits 2017–2019 GMC Sierra 2500 HD and 3500 HD (Base, Denali, SLE, SLT)
- Sold as a set of 4, paintable
- 2 inches of width coverage
- Recessed stainless steel bolts
SKU: B/W40967-14 -
Fender Flares
Bushwacker GMC Sierra OE Style Fender Flare Set (Paintable) – 40926-02
- Fits 2007–2013 GMC Sierra 1500 and 2007–2014 Sierra 2500 HD and 3500 HD in the listed trims
- Set of four front and rear fender flares
- Paintable, with an original matte black finish
- Part number B/W40926-02
- Dura-Flex 2000 material, .75 inch coverage width
SKU: B/W40926-02 -
-
Fender Flares
Bushwacker Ford/Lincoln Pocket Style Front Fender Flares (Paintable) – 20055-02
- Fits 2008–2010 Ford F-250 and F-350 Super Duty (listed trims)
- Bushwacker part number B/W20055-02, sold as a pair
- 2 inch width/coverage, front position, paintable
- Recessed stainless steel bolts and Dura-Flex 2000 material
- No drilling required for installation
SKU: B/W20055-02 -
-
Fender Flares
Bushwacker Ford OE Style Front Fender Flares (Paintable) – 20039-02
- Fits 1999–2007 Ford F-250 and F-350 Super Duty trucks (listed trims)
- Bushwacker part number B/W20039-02, sold as a pair
- 1.5 inch width/coverage, front position, paintable
- Dura-Flex 2000 material, thick and 100% UV protected
- No drilling required for installation
SKU: B/W20039-02 -
-
What this category covers
Larger tires stick out past stock bodywork, which throws rocks, mud and water at the paint and can be a problem under local fender coverage rules. Products here address that in several ways: molded flares that extend the stock fender, tube fenders that replace the factory metal, liners that protect the inner wheel well, and trim or retainers for repair and finishing.
Types of flares and fenders
- Pocket or rivet style: a boxy, bolt-look design that widens the fender and often adds around 2 inches of coverage per side.
- Extend-A-Fender style: an add-on flare that extends stock fender lines for more tire coverage.
- OE style: a smoother shape that looks like a factory part.
- Tube fenders: open, powder-coated steel designs that save weight and give extra clearance for flex and big tires.
- Inner fenders and liners: protect the engine bay and body from debris, and vented versions help airflow.
Choosing the right one
Start with width and coverage. If you run wide wheels with low backspacing, the tires may extend farther than a standard flare covers. Decide whether you want a paintable finish to color-match the vehicle or a textured black finish that hides trail wear. Check position (front, rear or both) and whether the part is sold as a pair or set. Most listings note a direct-fit design for specific vehicles, so match your year, make, model and bed or body style before ordering.
Installation notes
Some flares attach with supplied hardware and need no cutting or drilling, while others require trimming the factory flare or drilling into the body. Read the maker's instructions first. Clean the surface, check for rust, and seal any drilled holes to prevent corrosion. Paintable flares need primer and paint before or after mounting, depending on the instructions. Tube fenders usually bolt into factory fender locations but may need stock fenders removed. If you are not comfortable cutting body panels, use a body shop.
Material choice affects durability and looks. Flares are commonly made from injection-molded plastic or similar compounds that flex and resist cracking when hit by brush, while steel and aluminum tube fenders resist impacts from rocks and can be repaired if bent. Textured finishes hide scratches better than glossy ones, and powder coat on steel gives lasting rust protection when the coating is intact. If a tube fender is scratched to bare metal on the trail, touch it up to slow corrosion.
Think about the other parts on the vehicle too. Wider flares can change how mud and water are thrown at the sides, and added coverage can affect clearance for mirrors, side steps or rock sliders on some models. Liners and inner fenders keep wiring, the battery and the air intake cleaner, which is useful for water crossings and dusty roads. Retainers, rivets and trim pieces in this category are useful for repairs on older flares, so match them to the style and part number of the set they belong to.
Regulations
Many states require tires to be covered by a fender or flare, and coverage rules vary. Check your state's regulations before picking a width. Confirm fitment against the manufacturer's specifications for your exact vehicle.
Popular Fenders & Flares brands
- Bushwacker (61)
- Rough Country (10)
- Smittybilt (9)
- Fab Fours (9)
- Lund (6)
- Crown Automotive (6)
- Putco (6)
- Fishbone Offroad (6)
- Addictive Desert Designs (4)
- Poison Spyder Customs (4)
- DV8 Offroad (4)
- Fabtech (3)
Shop Fenders & Flares by type
- Fender Liners (18)
- Fender Trim (6)
- Fender Flare Trims (1)
Fenders & Flares FAQ
What is the difference between fender flares and tube fenders?
Fender flares add molded plastic or similar material that extends the stock fender for more tire coverage. Tube fenders replace the factory metal fender with open steel tubing, which saves weight and allows more clearance for travel and larger tires.
Do I need to drill or cut my body to install flares?
It depends on the product. Many direct-fit flares bolt on with included hardware, while others need trimming or drilling. The product page and the maker's instructions will say which, so read them before you commit.
What does paintable mean for fender flares?
Paintable flares come with a primed or smooth surface so you can paint them to match your vehicle. They usually need proper prep and a paint system suited to the material. Black textured flares skip painting but have a different look.
How wide a flare do I need for larger tires?
Compare the width of your tire and wheel, including offset, against the stock fender coverage, then choose a flare that covers the tread. Coverage listed per flare, such as 2 inches, shows how much it adds. Check state coverage rules as well.







