Overview
The Bushwacker Ford Extend-A-Fender Rear Fender Flares, part number B/W20016-01, are a paintable pair of rear flares for 1987–1991 Ford Bronco, F-150, F-250 and F-350 models. They provide 1.75 inches of width coverage for owners running oversize tires.
The flares use Dura-Flex 2000 material, which is flexible, durable and UV protected. They resist chalking, cracking and warping. They come in an OEM-style matte black finish and can be painted to suit the truck. The flares are matched to oversized tires.
Key features
- Rear position pair sized for oversize tire coverage
- 1.75-inch width coverage
- Dura-Flex 2000 material with built-in UV protection
- Resists chalking, cracking and warping.
- OEM-style matte black finish that can be painted
- Only minimum drilling is required for mounting.
Rear clearance basics
Rear flares cover the rear wheel openings and sit close to the tires, so clearance matters more than on the front. Oversized tires and suspension changes can shift the tire position, which can cause rubbing against the inside edge of the flare. Set tire pressure and ride height before measuring clearance, and check again after the first few trips.
On older trucks, the rear body mounts and fender edges may have worn or bent. Inspect the mounting points before installing, and replace any cracked or deformed brackets. Wash the area and dry it fully so the fasteners seat correctly.
Keep the flares clean with mild soap and water. Check fasteners after rough trail use and after the first few drives. Loosening usually shows up as rattles or a shifted gap at the flare edge.
- Measure tire clearance at full suspension travel
- Inspect rear body mounts before installing
- Recheck fasteners after rough trail use
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | B/W20016-01 |
| Product type | Extend-A-Fender rear fender flares |
| Quantity | Pair |
| Position | Rear |
| Width and coverage | 1.75 inches |
| Color | Paintable (OEM-style matte black finish) |
| Material | Dura-Flex 2000 |
| Installation | Minimum drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Bushwacker’s manufacturer fitment list covers these 1987–1991 models: Ford Bronco (Custom, Eddie Bauer, XL, XLT), Ford F-150 (Custom, XL, XLT Lariat), Ford F-250 (Custom, XL, XLT Lariat) and Ford F-350 (Custom, XL, XLT Lariat).
Ford Super Duty models, Bronco years outside 1987–1991, and F-series trucks from 1992 onward are not on this list. Front flares are a separate product. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting takes minutes with minimal drilling. Because these are rear flares, check clearance between the flares, the tires and the body after mounting.
What’s included
One pair of rear flares. Mounting hardware and a drilling template are not included, so check the package contents before starting.







