Select your vehicle

Bushwacker Ford OE Style Front Fender Flares (Paintable) – 20039-02

Bushwacker

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1999–2007 Ford F-250 and F-350 Super Duty trucks (listed trims)
  • Bushwacker part number B/W20039-02, sold as a pair
  • 1.5 inch width/coverage, front position, paintable
  • Dura-Flex 2000 material, thick and 100% UV protected
  • No drilling required for installation

Description

Overview

The Bushwacker Ford OE Style Front Fender Flares (Paintable), part number B/W20039-02, are front fender flares with 1.5 inch width/coverage for Ford Super Duty trucks. The listed fitment covers 1999–2007 Ford F-250 Super Duty and F-350 Super Duty trucks in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. Bushwacker presents the design as looking factory-installed, and describes its fit, finish and protection as exceeding original equipment.

The flares are made from Dura-Flex 2000, a material that is thick enough to resist warping and is 100% UV protected so it will not chalk. They come in a matte black finish that suits a blackout look, and they can be painted to match or accent the body color. Installation takes minutes and needs no drilling.

Key features

  • Front-position flares with 1.5 inch width/coverage
  • Sold as a pair
  • Dura-Flex 2000 material that is thick and resists warping
  • 100% UV protected, so the flares will not chalk
  • Paintable, or left in the OEM-style matte black finish
  • No drilling required for installation

Clearance and tire rub

Fender flares extend the body over the tire, so they change the space available at full lock and when the suspension compresses. Before driving, turn the wheel fully each way with the truck parked and look for contact between the tire and the inside edge of the flare. The same check is worth repeating after a few trail runs, since loose bushings and settled springs can shift the tire position slightly over time.

Tire size matters more than most buyers expect. Wider or taller tires can reach the flare sooner than stock tires, and a lift adds to that effect. Flares are usually the first part to show wear from rubbing, so look along the lower edge for scuffs or cracks. Paint touch-ups should be done after the surface is clean and dry, and the same care applies to the fender bolts that hold the flare in place.

Specifications

Brand Bushwacker
Part number B/W20039-02
Position Front
Width/Coverage 1.5 Inches
Quantity Sold as a pair
Color Paintable
Material Dura-Flex 2000
UV protection 100% UV protection
Installation No drilling required
Fitment Direct Fit

Vehicle fitment

It fits the 1999–2007 Ford F-250 and F-350 Super Duty in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. It is a direct fit.

Other model years and Ford models sit outside the listed fit. Verify your truck’s year, model and trim before ordering.

Installation notes

The flares install without drilling. Once they are mounted, check the clearance between the flare and the tire at full steering lock and under suspension compression, especially on a lifted truck.

What’s included

The set is sold as a pair, so it covers one flare per front fender. Confirm what comes in the box before installing.

SKU: B/W20039-02 Categories: ,

Fitment

VehicleYearsTrims
Ford F-250 Super Duty1999–2007Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Ford F-350 Super Duty1999–2007Harley-Davidson Edition, King Ranch, Lariat, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bushwacker B/W20039-02 fit a 2005 Ford F-250 Super Duty?

Yes. Bushwacker lists these front flares for 1999–2007 Ford F-250 and F-350 Super Duty trucks in the Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. Confirm your model, year and trim before ordering.

Does this part fit a 2008 F-350 Super Duty?

Not listed. The fitment for B/W20039-02 ends with 2007 model years, so 2008 and later Super Duty trucks fall outside the manufacturer list. Confirm your vehicle's year and trim before ordering.

What width do these front fender flares cover?

The width/coverage is 1.5 inches. The set is sold as a pair for the front of the truck, so one flare goes on each front fender.

Can these flares be painted?

Yes. The flares can be painted to match or accent the body color. They also come in an OEM-style matte black finish for a blackout look.

How often should I inspect flare mounts?

Check the mounts and fasteners every few months and after rough trail use. Look for loose fasteners, cracked edges, and gaps that change as the suspension moves. Tightening a loose fastener early keeps the flare from flexing into the tire.

Can I clean flares with a pressure washer?

Yes, a standard rinse works on most flare materials. Keep the nozzle a reasonable distance from edges and seams, and dry the surface before any paint work. Avoid harsh solvents on painted flares, since they can dull the finish.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon