Overview
The Fab Fours Open Fender front bumper without guard, part number FFIDR16-V4061-1, is a powder coated steel bumper for 2016–2020 Ram 2500 and Ram 3500 trucks. Fab Fours designed it to work with its Open Fender System, and the bumper is a direct fit for the listed trucks.
The bumper has an integrated 20-inch LED light bar housing in the center and mounting positions on each side for two 3×3 cube LEDs. The fit is high and tight, with lower cutouts that add airflow. The steel is designed to be lightweight, and no guard or a pre-runner guard versions are available.
Key features
- Designed specifically for the Open Fender System
- Integrated 20-inch light bar housing in the center
- Mounting positions on each side for two 3×3 cube LEDs
- Lower cutouts for increased airflow
- Powder coat finish over steel, with a sleek front and rear look
Open Fender front end care
A front bumper that mounts to an Open Fender System carries its own load path, so check the mounting hardware before each season of use. Loose bolts can let the bumper shift over rough roads and place stress on the surrounding body. Tightening hardware after the first few drives catches most problems early.
Powder coat finishes resist daily wear, but stone chips can expose bare steel over time. Clean the surface regularly and touch up chips promptly. Keep the lower cutouts free of mud and debris so airflow to the radiator and intercooler is not restricted.
- Re-torque mounting bolts after the first few drives
- Touch up stone chips on the powder coat
- Clear lower cutouts of mud and debris
- Confirm light wiring is routed clear of the housing
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FFIDR16-V4061-1 |
| Product line | Open Fender |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Powder coat |
| Guard | No guard |
| Light bar housing | 20 inch, integrated |
| Cube LED mounts | Two 3×3 on each side |
| Winch mount compatible | No |
| D-ring mount included | No |
| Light mounts included | No |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for 2016–2020 Ram 2500 and Ram 3500 trucks. It does not fit the Ram 1500. Confirm your model year and trim before ordering.
The list does not include the Ram 1500 or the Ram trucks from 2019 and later, so check your model year and trim first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This bumper is designed for trucks with the Open Fender System, so confirm that system is fitted before choosing it. Light mounts are not included, so plan to source them separately.
What’s included
The bumper is supplied as the Open Fender front bumper without guard.
Not included: the light mounts, the D-ring mount, and the lights for the housing and cube mounts.
