Jeep Wrangler (TJ) Suspension
242 suspension listed for the 1997–2006 Jeep Wrangler (TJ)
Showing 25–48 of 242 resultsSorted by popularity
-
-
-
-
-
Leaf Spring Pad
TeraFlex Axle Spring Pad – 3990292
- TeraFlex 3990292 front passenger side coil spring pad for Dana 44 or Dana 60 axles
- Raw 3/16 inch steel, ready for welding and then paint or powder coating
- Fits 1997–2006 Wrangler TJ and 2004–2006 Wrangler LJ models
- Welding required; one pad per kit
SKU: TER3990292 -
Leaf Spring Pad
TeraFlex Axle Spring Pad – 3990250
- TeraFlex 3990250 rear axle coil spring pad, raw steel for welding onto the axle bracket
- Designed for Dana 44 or Dana 60 axles with a 3″ diameter axle tube
- Fits 1997–2006 Jeep Wrangler TJ and 2004–2006 Jeep Wrangler LJ
- Cut from 3/16 inch steel; includes one coil spring pad; welding required
SKU: TER3990250 -
-
Shock Absorbers
Tuff Country SX6000 Shock Absorber – 62231
- Tuff Country SX6000 front shock absorber, part number 62231
- Hydraulic, twin-tube design with multi-stage valving
- Polyurethane bushings
- Lift note: w/Tuff Country Lift Kits Only
- Covers 1967 to 2013 Chevrolet, GMC, Dodge, Ram, Ford and Jeep vehicles
SKU: T/C62231 -
Shock Absorbers
Tuff Country SX8000 Shock Absorber – 61232
- Tuff Country SX8000 front shock absorber, part number 61232
- Twin-tube, nitrogen gas charged with polyurethane bushings
- Heavy-duty 5/8 inch piston rod
- Fits 1978 to 2015 Chevrolet, GMC, Ford, Dodge, Ram, Jeep and Toyota trucks
- Lift note: w/3.5 in. Rear Stock Blks
SKU: T/C61232 -
Shock Absorbers
Tuff Country SX8000 Shock Absorber – 61231
- Tuff Country SX8000 front shock absorber, part number 61231
- Twin-tube, nitrogen gas charged design intended to limit fading
- Heavy-duty 5/8 inch piston rod with polyurethane bushings
- Fits 1967 to 2006 Chevrolet, GMC, Dodge, Ford and Jeep vehicles
- Sold individually
SKU: T/C61231 -
-
-
-
Sway Bar Assemblies
TeraFlex Trail S/T Front Sway Bar System – 1743615
- TeraFlex 1743615 front Trail S/T sway bar system, single rate
- Trail rate only with an engagement knob for street and trail
- Includes sway bar links and hardware
- Fits 2004-2006 Jeep Wrangler LJ and 1997-2006 Wrangler TJ models
SKU: TER1743615 -
-
-
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8028
- Fits listed 1984–2001 Jeep Cherokee (XJ), 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler Unlimited (LJ)
- Rear gas-charged shock, 150 PSI nitrogen
- For suspension lifts of 4 – 5 in.
- Part number N8028, UPC 4364514879
- Sold individually, includes red polyurethane boot
SKU: SKYN8028 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8025
- Front Skyjacker Softride Nitro shock, part number N8025
- Fits Cherokee (XJ), Comanche, Grand Cherokee (ZJ), Wrangler (LJ and TJ)
- Best suited to severe off-road use; a little stiff for street use
- Lift height w/4 – 5 in. Lift
- For suspension lifts only; will not lift the vehicle
SKU: SKYN8025 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8018
- Rear Skyjacker Softride Nitro shock, part number N8018
- Fits Cherokee (XJ), Wrangler (LJ) and Wrangler (TJ) models in the trims covered
- 150 PSI nitrogen gas with an oversized piston head
- Collapsed length 13.71 in.
- Lift height w/1 – 3 in. Lift, for suspension lifts only
SKU: SKYN8018 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8016
- Fits Jeep Cherokee (XJ), Comanche, Grand Cherokee (ZJ and WJ), Wrangler (TJ) and Wrangler (LJ)
- Front shock: 150 PSI nitrogen gas pressurized, twin tube body
- Multi-stage velocity sensitive valving with an oversized piston head
- Part number N8016, UPC 803696147369
SKU: SKYN8016 -
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9525
- Front Skyjacker M95 Performance monotube gas shock, part number M9525
- Nitro gas monotube with internal bump stop and 46mm bore
- Rated for a 4 – 5 in. lift, with 180 degrees directional mounting
- Fits Jeep Cherokee XJ, Comanche, Grand Cherokee ZJ and Wrangler TJ
- Includes shock boot
SKU: SKYM9525 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7049
- Skyjacker Softride Hydro front shock absorber, part H7049
- Built for suspension lift kits, rated for a 6 in. lift
- Fits 1984-2001 Jeep Cherokee XJ and 1997-2006 Wrangler TJ and LJ
- Multi-stage velocity valving and 5/8 inch hardened double chrome rod
SKU: SKYH7049 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7028
- Rear Softride Hydro shock for 4 to 5 inch suspension lifts, part number H7028
- Fits 1984-2001 Jeep Cherokee (XJ), 2004-2006 Wrangler (LJ) Unlimited and 1997-2006 Wrangler (TJ)
- Collapsed length 14.82 in., extended length 24.84 in., stroke 10.02 in.
- Heavy-duty twin tube body with 5/8 inch hardened double chrome rod
SKU: SKYH7028 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7018
- Rear Softride Hydro shock absorber, part number H7018, for 1 to 3 in. suspension lifts
- Fits 1984 to 2001 Jeep Cherokee XJ, 1997 to 2006 Wrangler TJ and 2004 to 2006 Wrangler LJ Unlimited
- Extended 22.58 in., compressed 13.71 in.
- Multi-stage velocity sensitive valving and 5/8 in. chrome rod
SKU: SKYH7018
