Overview
The TeraFlex 1449575 is a PRO-LCG long arm suspension system for the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X models. It is built for off-road use, aiming for suspension performance with minimal modification.
The system uses a true long arm upper front suspension that still works with the stock axle brackets. At the rear, it uses 4-link upper geometry and eliminates the rear track bar. Adjustable rear anti-squat bracketry is included for tuning, and the lower FlexArm tubing is 1.75 inch DOM for strength.
The system is designed to fit 35 inch or larger tires and works with engine conversions such as V6 and V8 swaps and with aftermarket high pinion axles. The maximum tire size is 35×12.50, and shocks are not included.
Key features
- Long arm front upper suspension
- Works with the stock axle bracketry
- 4-link rear upper geometry
- Eliminates the rear track bar
- Adjustable rear anti-squat bracketry
- 1.75 inch DOM lower FlexArm tubing
- Balances a low center of gravity with ground clearance
- Max tire size 35×12.50
Long arm suspension maintenance
Long arm suspensions depend on the arms, bushings and mounts holding the axle in position, so the joints and bushings should be inspected more often than on a stock setup. A system that removes a track bar relies on the upper links and anti-squat hardware to control axle movement, which makes torque and bolt checks important after the first drives. Adjustable anti-squat bracketry needs to be locked down and rechecked after any change in ride height.
Steering stability depends on the front geometry, so check tie rod ends, drag link ends and the steering stabilizer after installation. Tubing and welds on the lower arms should be looked at for cracks after rough trail use. Shock choice matters on a long arm system because shock angles change the ride, so pick shocks that suit the arm geometry and the travel the lift allows.
- Torque suspension fasteners after the first trips
- Inspect FlexArm bushings for cracks or play
- Check steering components for play after installation
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1449575 |
| UPC | 843885021544 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Long arm |
| Rear lift method | Coil springs |
| Lower FlexArm tubing | 1.75 inch DOM |
| Max tire size | 35×12.50 |
| Shocks | Not included |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon models, and the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X models.
The product title and description refer to the PRO-LCG system for off-road use, and the specifications list a 3 to 4.99 inch lift height range, so confirm the lift height with TeraFlex. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The system changes the front upper suspension and removes the rear track bar, so check the alignment and driveline angles after installation. Engine conversions and high pinion axles can be used with this system; confirm the final setup against your vehicle before ordering.
What’s included
The system includes the long arm front upper suspension, the 4-link rear upper geometry, the adjustable rear anti-squat bracketry and the 1.75 inch DOM lower FlexArm tubing.
Not included: Shocks.









