Overview
The TeraFlex 4313320 is a replacement track bar bushing for the Jeep Wrangler TJ. It uses OE style rubber bushings with an additional rate plate designed for more responsive control. The rate plate is designed to reduce front wheel shimmy and to improve durability and tunability.
Key features
- OE style rubber bushing
- Additional rate plate
- Designed to reduce front wheel shimmy
- Improves durability and tunability
Pressing in a bushing
Pressing in a track bar bushing requires a shop press or a fixture that keeps the sleeve square to the bore. Forcing it unevenly can tear rubber or deform the metal sleeve, so proper alignment during installation matters more than force. Take time to seat the bushing, then reinstall the track bar and check that the bolts seat fully before loading the suspension.
Rubber bushings age from heat, ozone and oil exposure, so check the old bushing for cracking or hardening before removing it. Once installed, have the front alignment checked and inspect the bushing again after rough trail use. Keep the old parts until the new bushing has been road tested, in case a fitment question comes up.
- Keep the press centered on the sleeve
- Confirm track bar bolts seat fully
- Recheck alignment after reinstallation
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4313320 |
| UPC | 843885025924 |
| Material | Rubber |
| Installation | Must be pressed in |
| Fitment type | Universal fit listed |
Vehicle fitment
It is made for the 1997–2006 Jeep Wrangler (TJ). Compare the bushing with your track bar before ordering.
Other Wrangler generations are not part of this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bushing must be pressed in, so a press or an installer with the right tools is needed. Alignment should be checked after the track bar is reinstalled.
What’s included
The package is a single track bar bushing that must be pressed in. Check the contents against your installation before starting.






