Overview
The TeraFlex 1615000 is a complete 8 arm FlexArm kit for the Jeep Wrangler TJ and LJ. It includes front and rear upper and lower flex arms and can be added to an existing suspension lift. It fits 1997-2006 Wrangler TJ models and 2004-2006 Wrangler LJ models, including Unlimited and Unlimited Rubicon.
The flex arms set pinion and caster angles for proper alignment, re-center the axle in the wheel well and adjust wheelbase length. The kit works with any lift height.
Key features
- 8 adjustable flex arms: front and rear, upper and lower
- Sets pinion and caster angles for alignment
- Re-centers the axle in the wheel well for suspension movement
- Adjusts wheelbase length
- Can be added to any existing suspension lift
- Works with any lift height.
Alignment after flex arm setup
Flex arms set the geometry that controls caster and pinion angle, so an alignment is part of installing them. Changing either angle changes how the vehicle tracks, how it returns to center, and how the tires wear. Set the arms first, then align the front and rear to the specifications for your vehicle.
Driveline angles are affected as the axle moves, so check the angles once the arms are adjusted. Vibration at highway speed or a clunk when the drivetrain loads can point to an angle problem. Inspect the bushings and joints in the arms during regular service, and recheck alignment after any change in tire size or lift height.
Tire wear is a useful check. Feathering or heavy wear on one edge can mean the toe or caster is off after installation. Note the tire pattern at the first service and compare it with the earlier setup.
- Check driveline angles after any arm change
- Recheck alignment after the first few drives
- Inspect arm bushings and joints for wear
- Watch for uneven tire wear across the tread
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1615000 |
| UPC | 843885022572 |
| Arms included | 8 |
| Suspension type | Short arm |
| Lift height range | Any height |
| Shocks | Not included |
Vehicle fitment
It fits the 1997-2006 Jeep Wrangler TJ and the 2004-2006 Jeep Wrangler LJ, including Unlimited models. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the pinion and caster angles with the flex arms before aligning the vehicle, then check driveline angles once the arms are adjusted. Install the kit with an existing suspension lift in place.
What’s included
Included: all eight front and rear upper and lower FlexArms. Shocks are not included.









