Select your vehicle
-13%

Moog Front Track Bar Bushing – K3147

Moog

$28.01In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 10:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front track bar bushing, Moog part K3147
  • Fits 1984–2001 Jeep Cherokee (XJ), 1986–1992 Jeep Comanche, 1993–1998 Jeep Grand Cherokee (ZJ), 1993 Jeep Grand Wagoneer (SJ) and 1997–2006 Jeep Wrangler (TJ)
  • Inside diameter 10.1 mm minimum to 10.3 mm maximum
  • A bolt of roughly 3/8 or 10 mm should work

Description

Overview

The Moog K3147 is a front track bar bushing for the 1984–2001 Jeep Cherokee (XJ), 1986–1992 Jeep Comanche, 1993–1998 Jeep Grand Cherokee (ZJ), 1993 Jeep Grand Wagoneer (SJ) and 1997–2006 Jeep Wrangler (TJ). The track bar, also called a Panhard bar, keeps the axle centered side to side, and this rubber bushing replaces the worn bushing at that joint.

The bore measures 10.1 mm minimum to 10.3 mm maximum, so the bolt diameter has to fall within that range.

Signs of bushing wear

A track bar bushing carries side-to-side load from the axle, so wear usually shows up as movement rather than a sudden failure. Typical signs include a clunk or knock when the steering changes direction, the axle drifting left or right on uneven pavement, and uneven front tire wear. Rubber bushings can crack, split or flatten with age, and rough trail use speeds that up, especially on vehicles that see frequent articulation.

When the old bushing comes out, inspect the track bar ends and the frame bracket for looseness, cracks or bent metal. Bolts that have sat in one position for years may seize, so penetrating oil and patience reduce the chance of damage. If the track bar itself is worn or bent, replacing only the bushing will not correct the problem. Recheck the bolts after the first few drives.

Specifications

Brand Moog
Part number K3147
Position Front track bar
Component Track bar bushing
Inside diameter 10.1 mm minimum, 10.3 mm maximum
Bolt size Roughly 3/8 or 10 mm
Fitment type Direct fit

Vehicle fitment

It fits the 1984–2001 Jeep Cherokee (XJ), 1986–1992 Jeep Comanche, 1993–1998 Jeep Grand Cherokee (ZJ), 1993 Jeep Grand Wagoneer (SJ) and 1997–2006 Jeep Wrangler (TJ).

Confirm fit against your vehicle’s year, model and trim before ordering, especially for the 2007 and later Wrangler JK and the 2002–2007 Jeep Liberty.

What’s included

Review the parts supplied before beginning the installation.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–2001Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
Jeep Comanche1986–1992Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi
Jeep Grand Wagoneer (SJ)1993Base
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Moog K3147 fit a 2005 Jeep Wrangler TJ?

Yes. It fits the 1997–2006 Jeep Wrangler (TJ), which includes 2005 models. It also fits the Cherokee XJ, Comanche, Grand Cherokee ZJ and Grand Wagoneer SJ, so confirm your model against those vehicles before ordering.

Does this bushing fit a Jeep Wrangler JK?

No. Coverage for the Wrangler ends with the 1997–2006 TJ, so the JK generation is not among the covered vehicles. Confirm fit for your year, model and trim before ordering.

What bolt size does the K3147 need?

The bushing inside diameter runs from 10.1 mm minimum to 10.3 mm maximum. A bolt of roughly 3/8 or 10 mm should work, as long as it falls within that range.

Should the front alignment be checked after replacing the track bar bushing?

Yes. Changes at the track bar joint can shift axle position and affect steering centering, so have the front alignment checked after the work is done. Recheck the bolts after the first few drives to confirm they are still tight.

How can you tell the bushing has worn out?

Look for cracks, separation from the metal sleeve, or visible movement at the joint. A knock when turning, or a steering wheel that does not return smoothly to center, are also common signs of wear.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon