Select your vehicle

Trail Gear IFS Steering Box Mount Kit – 130004-1-KIT

Trail Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • IFS steering box mount kit for crossover steering on 79-85 4wd Toyota
  • Inner and outer frame reinforcing plates, 3/16 inch and 1/4 inch thick
  • Includes Grade 8 bolts, DOM tubing and crimp nuts

Description

Overview

The Trail Gear 130004-1-KIT is an IFS steering box mount kit for installing crossover steering on 79-85 4wd Toyota vehicles. It supplies the inner and outer frame reinforcing plates, bolts and tubing needed to mount an IFS steering box.

The kit is built as a heavy-duty frame mount. Its angled leading and trailing plate edges are designed to help prevent frame cracking.

Key features

  • Inner and outer frame reinforcing plates
  • Angled leading and trailing plate edges to prevent frame cracking
  • Heavy-duty design
  • Grade 8 bolts, DOM tubing and crimp nuts included

Frame prep for a crossover install

A crossover steering install moves the steering box from its factory position and relies on the frame to carry the new loads. Before mounting plates, inspect the frame rails for rust, cracks or previous repairs. Clean the mounting area thoroughly so the plates sit flat and the bolts clamp evenly.

Crossover setups put more stress on the frame and steering linkage than stock layouts, so check clearances to the axle, tie rods and drag link once everything is in place. Torque the bolts evenly and recheck them after the first drives. Tubing and crimp nuts should be fitted without forcing, so the joints stay square.

  • Inspect frame rails before mounting
  • Clean the mounting area fully
  • Check clearance to axle and tie rods
  • Recheck bolts after the first drives

Specifications

Brand Trail Gear
Part number 130004-1-KIT
UPC 70000621784
Inner plate thickness 3/16 inch
Outer plate thickness 1/4 inch
Hardware Grade 8 bolts, crimp nuts
Tubing DOM tubing

Vehicle fitment

The kit is for crossover steering installs on 79-85 4wd Toyota vehicles. Check your model, year and drivetrain against your truck before ordering.

Two-wheel-drive Toyota vehicles and other years are outside the scope of this kit. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Inner plates, outer plates, Grade 8 bolts, DOM tubing and crimp nuts.

Not included: The IFS steering box is not included. You will need to supply it for the install.

SKU: TGI130004-1-KIT Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 13.00 × 13.00 × 4.50 in
brands

Questions & Answers

Is the Trail Gear 130004-1-KIT an IFS steering box mount for Toyota?

Yes. It is an IFS steering box mount kit for crossover steering on 79-85 4wd Toyota vehicles. Confirm your truck's model, year and drivetrain before ordering.

What does the 130004-1-KIT include?

The kit includes inner and outer frame reinforcing plates, Grade 8 bolts, DOM tubing and crimp nuts. The inner plate is 3/16 inch thick and the outer plate is 1/4 inch thick.

Does the kit include the IFS steering box?

No. The kit is the mount hardware used when installing an IFS steering box. The steering box is not included, so source it separately.

Can the frame plates be used with a different steering setup?

Only if the frame and steering geometry match the install they were designed for. Check plate position, clearance to the axle and the steering linkage before using them in another layout, and recheck the bolts after the first drives.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon