Overview
The Trail Gear 110113-1-KIT is a left hand threaded tube adapter, a weld-in bung for Heim and Johnny Joint rod ends. It has a 1-1/4 inch -12 thread and works with a 1 inch minimum tube ID. It is a universal fit part.
Only the bung is listed, so the jam nut must be added separately. Confirm the left hand thread matches your joint before welding.
Key features
- Left hand 1-1/4 inch -12 thread
- 1 inch minimum tube ID
- Weld-in bung for Heim and Johnny Joints
- Universal fit
- Jam nut not included
Weld-in tube fabrication tips
Weld-in bungs hold a rod end at the end of a tube, so the weld has to carry steady load as the suspension cycles. Prep the tube ends squarely and clean them of paint, rust and oil before tacking the bung in place. Fit the bung and check its alignment before the final weld so the rod end sits straight once installed.
Heat from welding can distort thin tubing, so tack the bung and let it cool between passes. A jam nut locks the rod end once the thread is set, which keeps adjustment from drifting on rough trails. After installation, check the weld for cracks, look for any flex at the bung and recheck threads whenever the joint is serviced. Matching the rod end and the bung thread before cutting any tube saves a rework.
- Clean the tube inside and out before welding
- Check the rod end thread before cutting tube
- Inspect welds after rough trail use
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 110113-1-KIT |
| UPC | 70000621485 |
| Thread size | 1-1/4 inch -12 |
| Thread direction | Left hand |
| Minimum tube ID | 1 inch |
| Jam nut | Not included |
| Fitment | Universal fit |
Vehicle fitment
Universal fit, not vehicle-specific: no make, model or years are listed, so choose by joint thread and tube size.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a weld-in part, so the bung is welded to the tube at a 1 inch minimum inside diameter. A qualified fabricator should make the weld.
What’s included
The threaded tube adapter bung, left hand.
Not included: Jam nut.









