Overview
The Trail Gear Rock Assault ram and clevis kit, part number 130282-1-KIT, is a hydraulic steering ram kit built around an 8 in. double ended ram. It includes cylinder clamps, clevis ends, clevis end bolts and spacers for mounting the ram.
Trail Gear presents its hydraulic steering ram range as covering everything from a single seal for a custom build to a complete system. This kit is aimed at builders who need the ram and its mounting hardware in one package.
Key features
- 8 in. double ended ram
- Cylinder clamps for mounting the ram
- Clevis ends with clevis end bolts
- Spacers included
Hydraulic steering basics
A hydraulic steering ram adds assistance or control to the steering linkage, and it works only as well as the system around it. The ram’s clevis ends and clamps keep the cylinder aligned with the linkage so that it does not bind. Good alignment protects the ram’s seals, so mounting geometry is worth checking before the system is pressurized.
Hydraulic systems depend on clean fluid and tight connections. Flush debris from hoses and fittings before assembly, and use fresh fluid in the reservoir. After filling, cycle the steering slowly from lock to lock and watch each joint for seepage. Inspect the clevis bolts and spacers after the first trail outings, since shock loads can shift them.
- Keep fluid clean during assembly
- Cycle the system slowly after filling
- Check clevis bolts after rough terrain
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130282-1-KIT |
| UPC | 70000621700 |
| Ram type | Double ended, 8 in. |
| Mounting hardware | Cylinder clamps, clevis ends, clevis end bolts, spacers |
Vehicle fitment
This is a hydraulic steering ram kit rather than a vehicle-specific part. No vehicle years, makes or models are given, so the match depends on your steering box, axle and mounting layout.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A hydraulic ram needs a matching pump, hoses and fittings, and the clamps and clevis ends must line up so the ram moves freely. Have the hydraulic work done by an experienced installer and check every connection for leaks once the system is filled.
What’s included
Included: the 8 in. double ended ram, cylinder clamps, clevis ends, clevis end bolts and spacers.
Not included: the hydraulic pump, hoses and fittings.









