Overview
It fits 2015–2016 Polaris RZR XP 4 1000 models and the 2016 RZR XP 4 Turbo. The Shorty length uses all six factory mounting points with no extra trailer space over the stock length.
The cage is a one-piece, fully welded structure made from CNC laser notched and CNC bent DOM steel tubing. It strengthens the existing chassis, and it comes complete, unlike the multi-piece, bolt-together factory cage.
Key features
- Uses all six factory mounting points
- One-piece, fully welded structure
- CNC laser notched and CNC bent DOM steel tubing
- B-pillar floor mounts cut and bent from 3/16-inch plate steel
- Welded door hinge mounts for factory doors and SDR’s Hi-Bred door system
- Light pocket
Before installing a cage
A roll cage is a structural part, so check the mounting points before any work starts. Clean the factory mounting surfaces, and inspect the bolts and factory hardware for corrosion or cracks, replacing anything worn. A cage that bolts to the existing chassis depends on those points, so weak or damaged mounts reduce what the cage can do in a rollover.
Wiring and accessories need planning too. Route harnesses through the A-pillar pass-through and keep wires clear of moving parts and sharp edges. Doors, nets and seats should be set up after the cage is in place, with clearance checked at the hinges. Re-check all fasteners after the first few trail runs, since new cages can settle as the hardware seats.
- Check the factory mounts for corrosion before fitting
- Re-torque fasteners after the first trail runs
- Keep harness runs away from sharp tube edges
Specifications
| Brand | SDR Motorsports |
|---|---|
| Part number | 710604-P |
| Type | Sport cage, Shorty length |
| Tubing | DOM steel, CNC laser notched and CNC bent |
| B-pillar floor mounts | 3/16-inch plate steel |
| Mounting | Six factory mounting points |
| Wiring | Pass-through in the front A-pillar mounts |
| Doors | Factory doors and most aftermarket bolt-on doors |
| Light pocket | Yes |
Vehicle fitment
This cage fits 2015–2016 Polaris RZR XP 4 1000 models and 2016 RZR XP 4 Turbo units.
The list does not include 2017 and later RZR XP 4 models, or RZR XP 1000 models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cage mounts to the six factory points and re-uses the factory hardware. The front A-pillar mounts have a wiring pass-through, so wiring can run through the cage tubes. The B-pillar floor mounts are thicker than the factory parts they replace.
What’s included
A complete sport cage.
Not included: Confirm whether doors are part of your order. The cage is designed to work with factory doors and most aftermarket bolt-on doors.









