Select your vehicle
-13%

Pro Armor Rear Skid Plate (Raw) – P141P362

Pro Armor

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear skid plate in raw finish, part P141P362
  • For the XP1000 Asylum Cage System
  • Aircraft grade aluminum with included color matched clamps
  • Adds protection to the rear of the XP 1000

Description

Overview

The Pro Armor rear skid plate in raw finish (part number P141P362) is designed for the XP1000 Asylum Cage System. It adds protection to the rear of the XP 1000 and finishes the look of the cage.

The plate is made from aircraft grade aluminum and mounts with color matched clamps. Its solid skid bolts add rear protection.

Key features

  • Raw finish rear skid plate
  • Designed for the XP1000 Asylum Cage System
  • Aircraft grade aluminum construction
  • Color matched clamps included
  • Solid skid bolts for added rear protection

Maintenance and rear clearance

A rear skid plate sits under the back of the machine, where it takes contact from stumps, rocks and ledges when the rear end drops. It keeps the lower body from being pushed into those obstacles and can protect parts that sit close to the rear of the frame. Because it works as a shield, its mounts see the most stress during hard landings.

Check the clamps and skid bolts after rough rides, looking for loose fasteners, bent edges and fresh scrapes that show the plate is doing its job. Aluminum scrapes easily, so light marks are normal, while cracks near the mounts call for a closer look. If you change the rear bumper or tires, recheck clearance between the plate and those parts.

  • Retighten clamps after the first trail runs
  • Look for cracks near the skid bolts
  • Keep the underside clear of packed mud

Specifications

Brand Pro Armor
Part number P141P362
Material Aircraft grade aluminum
Finish Raw
Position Rear
Compatible with XP1000 Asylum Cage System
Included Color matched clamps
Fit type Fits the XP1000 Asylum Cage System.

Vehicle fitment

This plate is designed for the XP1000 Asylum Cage System. Confirm the cage type on your UTV before ordering, since the plate is built around that setup.

What’s included

One raw rear skid plate and its color matched clamps.

Questions & Answers

Does the raw rear skid plate fit the XP 1000 without the Asylum Cage System?

No, the plate is designed for the XP1000 Asylum Cage System. Check your cage type before ordering, because other cage setups are not covered here.

Is the raw finish painted?

No. The raw finish is the bare aluminum surface, and no paint is applied. The solid skid bolts add protection at the rear of the cage.

How is the raw skid plate attached?

It is attached with the color matched clamps included with the plate. Installation is straightforward, and the solid skid bolts add protection at the rear.

How often should I check the skid plate hardware?

Check the clamps and skid bolts after rough trail rides and before long trips. Tighten anything that has backed off and look for cracks around the mounting points. Routine checks catch loose hardware before it causes rattling or shifting.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon