Overview
The Rubicon Express RE2025 is a weld-on shock mount in the drop position, made from heavy gauge steel. It is designed for longer travel shocks, which need a mounting point that the factory location does not provide.
Key features
- Weld-on shock mount
- Drop position
- Heavy gauge steel construction
- Designed for longer travel shocks
Shock mount placement
Longer travel shocks change the angle and length of the damper, so the mounting point has to suit the new geometry. A mount placed too far forward, back or in or out can limit travel, bind at full compression or rub against the frame or brake lines. Measure the shock length at ride height and at full extension before choosing a location, and check the clearance through the full suspension range.
Because the mount is welded, the frame section it sits on should be clean, solid and free of rust or cracks. A qualified welder should judge whether the frame can take the weld, and the surrounding area may need reinforcement. Consider the shock, the bump stops and the lower bracket together, since they all share the load.
- Check clearance through full suspension travel
- Inspect the frame for rust or cracks before welding
- Review bump stop position with the new shock
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2025 |
| Type | Weld-on shock mount, drop position |
| Material | Heavy gauge steel |
| Mount location | Universal |
| Installation | Weld-on |
Vehicle fitment
Vehicle fit depends on the frame and shock layout of your vehicle, so fit has to be checked before buying.
Check the frame and shock layout of your vehicle before buying.
Installation notes
This is a weld-on part, so it needs a qualified welder and a frame that can take the weld.
What’s included
The mount is supplied alone, with no shock or hardware included.

