Overview
The Rubicon Express JL7134 is a 2 inch economy lift kit for 2 and 4 door Jeep Wrangler JL models from 2018 onward. It uses steel coil spring spacers that keep the factory springs and dampers, so the ride stays close to a stock JL.
The kit adds sway bar drops and bump stop extensions. The bump stop extensions maintain clearance for 35 and 37 inch tires, and the spacers have index pins and holes that locate the factory isolators.
The kit increases ground clearance with a straightforward install. The spacers make room for 35 inch tires, and up to 37 inch tires on Rubicon models.
Key features
- Steel coil spring spacers with index pins and holes
- Bolt-in bump stop extensions
- Sway bar drops that maintain geometry
- Prevents over compression of the factory coil springs without loss of suspension travel
- No driveline or exhaust modifications required
Tire clearance and alignment
Spacer lifts raise the body without changing the arms, so the suspension geometry shifts less than it does with a long arm build. Even so, the sway bar drops and spacers change ride height, which affects front and rear alignment. Recheck toe after the first few drives and once the tires have settled into the new position.
Tire size is the main reason owners lift a JL, and the bump stop extensions help control the axle at full compression on larger tires. Shock extensions are not included, so plan for them if the setup calls for more travel. Inspect the bump stops for cracks and the sway bar drop bushings for wear during routine checks.
- Check tire rub at full lock
- Confirm the bump stops clear the spring seats
- Inspect sway bar drop bushings at regular intervals
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JL7134 |
| Kit type | Economy kit, 2 inch suspension lift |
| Lift height range | 2 to 2.5 inches |
| Spacers | Steel coil spring spacers |
| Bump stops | Bolt-in extensions for 35 and 37 inch tires |
| Sway bar | Drops |
| Shocks | Not included, shock extensions sold separately |
| Modifications | No driveline or exhaust modifications required |
Vehicle fitment
It fits 2018–2026 Jeep Wrangler (JL) models in 2 and 4 door bodies. Check the year, model and trim before buying.
It is not a fit for the JK, the Gladiator, or the TJ and LJ Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The coil spacers and sway bar drops change the suspension height, so have the alignment checked after installation. Shock extensions are not included, so plan for them separately if your setup needs them.
What’s included
Steel coil spring spacers, sway bar drops and bolt-in bump stop extensions for the Jeep Wrangler JL.
Not included: shock extensions.
















